Freienbach: observed built density
Municipality in the canton of Schwyz · FSO no. 1322 · Parcel data as of July 2025
- Parcels
- 3’355
7 % of the canton
- Municipal zones
- 30
- Median utilization
- 65 %
Canton: 62 %
Switzerland: 10 %
- Median GFZ
- 0.51
Canton: 0.37
Switzerland: 0.09
- Median height
- 10.6 m
Canton: 10.2 m
Switzerland: 9.5 m
- Median floors
- 2.6
Canton: 2.6
Switzerland: 2.3
About Freienbach
Freienbach is a municipality in the canton of Schwyz. The parcel data lists 3’355 parcels in 30 municipal zone types. The zone types with the most parcels are Wohnzone W2 (952), Wohnzone W3 (426) and Landwirtschaftszone (283).
The median parcel is built to a volume utilization of 65 %; half of the parcels lie between 9 % and 101 %. The canton median is 62 %, close to the level of Freienbach.
The median building height is 10.6 m at 2.6 floors, and the median floor-area ratio (GFZ) is 0.51. Parcels built in the last 20 years reach a mean volume utilization of 122 % (476 parcels), higher than the 86 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Wohnzone W2 | 952 | 81 % |
| Wohnzone W3 | 426 | 77 % |
| Landwirtschaftszone | 283 | 8 % |
| Landhauszone 2 | 278 | 65 % |
| Wohn- und Gewerbezone WG4 | 214 | 85 % |
| Zentrumszone | 185 | 55 % |
| Übriges Gemeindegebiet | 168 | 0 % |
| Wohnzone W4 | 132 | 82 % |
| Wald | 121 | 0 % |
| Wohn- und Gewerbezone WG3 | 120 | 62 % |
| Gewerbezone | 96 | 94 % |
| Kernzone | 81 | 53 % |
| Other zones (18) | 299 | - |
Volume utilization (ratioV)
Of the 3’319 parcels with a value, half lie between 9 % and 101 %. The median is 65 % and the mean 80 %.
Share of parcels by range
- below 50 %40 %
- 50 % to below 100 %34 %
- 100 % to below 150 %18 %
- 150 % and above8 %
Floor-area ratio (GFZ)
Of the 3’319 parcels with a value, half lie between 0.08 and 0.87. The median is 0.51 and the mean 0.56.
Share of parcels by range
- below 0.5049 %
- 0.50 to below 1.0033 %
- 1.00 to below 1.5013 %
- 1.50 and above5 %
Building height
Of the 2’425 parcels with a value, half lie between 8.7 m and 12.9 m. The median is 10.6 m and the mean 10.9 m.
Share of parcels by range
- below 8 m17 %
- 8 m to below 12 m52 %
- 12 m to below 20 m30 %
- 20 m and above1 %
Number of floors
Of the 2’377 parcels with a value, half lie between 1.7 and 3.4. The median is 2.6 and the mean 2.6.
Share of parcels by range
- below 221 %
- 2 to below 327 %
- 3 to below 545 %
- 5 and above7 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 3’355 | 86 % |
| Last 60 years | 1’601 | 104 % |
| Last 40 years | 1’145 | 109 % |
| Last 20 years | 476 | 122 % |
| Last 15 years | 366 | 114 % |
| Last 10 years | 262 | 117 % |
| Last 5 years | 117 | 110 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).