Ingenbohl: observed built density
Municipality in the canton of Schwyz · FSO no. 1364 · Parcel data as of July 2025
- Parcels
- 2’045
4 % of the canton
- Municipal zones
- 39
- Median utilization
- 59 %
Canton: 62 %
Switzerland: 10 %
- Median GFZ
- 0.44
Canton: 0.37
Switzerland: 0.09
- Median height
- 10.3 m
Canton: 10.2 m
Switzerland: 9.5 m
- Median floors
- 2.9
Canton: 2.6
Switzerland: 2.3
About Ingenbohl
Ingenbohl is a municipality in the canton of Schwyz. The parcel data lists 2’045 parcels in 39 municipal zone types. The zone types with the most parcels are Wohnzone 2 Geschosse (438), Landwirtschaftszone (355) and Wohnzone 3 Geschosse (196).
The median parcel is built to a volume utilization of 59 %; half of the parcels lie between 8 % and 99 %. The canton median is 62 %, close to the level of Ingenbohl.
The median building height is 10.3 m at 2.9 floors, and the median floor-area ratio (GFZ) is 0.44. Parcels built in the last 20 years reach a mean volume utilization of 131 % (263 parcels), higher than the 100 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Wohnzone 2 Geschosse | 438 | 69 % |
| Landwirtschaftszone | 355 | 17 % |
| Wohnzone 3 Geschosse | 196 | 79 % |
| Wohn- und Gewerbezone 3 Geschosse | 149 | 92 % |
| Wohnzone 4 Geschosse a | 145 | 76 % |
| Wald | 122 | 0 % |
| Kernzone 1 | 88 | 123 % |
| Kernzone 3 | 68 | 78 % |
| Kernzone 2 | 67 | 43 % |
| Gewerbezone | 59 | 55 % |
| Übriges Gemeindegebiet | 59 | 0 % |
| Wohnzone 5 Geschosse | 50 | 73 % |
| Other zones (27) | 249 | - |
Volume utilization (ratioV)
Of the 2’001 parcels with a value, half lie between 8 % and 99 %. The median is 59 % and the mean 94 %.
Share of parcels by range
- below 50 %44 %
- 50 % to below 100 %32 %
- 100 % to below 150 %12 %
- 150 % and above12 %
Floor-area ratio (GFZ)
Of the 2’000 parcels with a value, half lie between 0.07 and 0.81. The median is 0.44 and the mean 0.57.
Share of parcels by range
- below 0.5054 %
- 0.50 to below 1.0029 %
- 1.00 to below 1.5010 %
- 1.50 and above7 %
Building height
Of the 1’347 parcels with a value, half lie between 8.5 m and 12.7 m. The median is 10.3 m and the mean 10.9 m.
Share of parcels by range
- below 8 m18 %
- 8 m to below 12 m52 %
- 12 m to below 20 m27 %
- 20 m and above2 %
Number of floors
Of the 1’048 parcels with a value, half lie between 2.1 and 3.7. The median is 2.9 and the mean 3.0.
Share of parcels by range
- below 28 %
- 2 to below 326 %
- 3 to below 555 %
- 5 and above11 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 2’045 | 100 % |
| Last 60 years | 1’002 | 117 % |
| Last 40 years | 669 | 119 % |
| Last 20 years | 263 | 131 % |
| Last 15 years | 173 | 135 % |
| Last 10 years | 111 | 152 % |
| Last 5 years | 52 | 143 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).