Schübelbach: observed built density
Municipality in the canton of Schwyz · FSO no. 1346 · Parcel data as of July 2025
- Parcels
- 2’266
5 % of the canton
- Municipal zones
- 20
- Median utilization
- 74 %
Canton: 62 %
Switzerland: 10 %
- Median GFZ
- 0.51
Canton: 0.37
Switzerland: 0.09
- Median height
- 10.2 m
Canton: 10.2 m
Switzerland: 9.5 m
- Median floors
- 2.7
Canton: 2.6
Switzerland: 2.3
About Schübelbach
Schübelbach is a municipality in the canton of Schwyz. The parcel data lists 2’266 parcels in 20 municipal zone types. The zone types with the most parcels are Wohnzone 2 Geschosse (671), Landwirtschaftszone (546) and Wohnzone 3 Geschosse (301).
The median parcel is built to a volume utilization of 74 %; half of the parcels lie between 13 % and 116 %. The canton median is 62 %, so Schübelbach sits above it.
The median building height is 10.2 m at 2.7 floors, and the median floor-area ratio (GFZ) is 0.51. Parcels built in the last 20 years reach a mean volume utilization of 135 % (415 parcels), higher than the 109 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Wohnzone 2 Geschosse | 671 | 81 % |
| Landwirtschaftszone | 546 | 7 % |
| Wohnzone 3 Geschosse | 301 | 114 % |
| Wohnzone 4 Geschose | 227 | 86 % |
| Wohn- und Gewerbezone 4 Geschosse | 196 | 67 % |
| Kernzone | 128 | 76 % |
| Wald | 63 | 0 % |
| Gewerbezone | 59 | 130 % |
| Zone für öffentliche Bauten und Anlagen | 25 | 77 % |
| Verkehrsflächen innerhalb Bauzone | 11 | 0 % |
| Gewässer | 10 | 0 % |
| Verkehrsfläche ausserhalb Bauzone | 9 | 0 % |
| Other zones (8) | 20 | - |
Volume utilization (ratioV)
Of the 2’244 parcels with a value, half lie between 13 % and 116 %. The median is 74 % and the mean 102 %.
Share of parcels by range
- below 50 %36 %
- 50 % to below 100 %31 %
- 100 % to below 150 %18 %
- 150 % and above15 %
Floor-area ratio (GFZ)
Of the 2’244 parcels with a value, half lie between 0.08 and 0.84. The median is 0.51 and the mean 0.54.
Share of parcels by range
- below 0.5049 %
- 0.50 to below 1.0034 %
- 1.00 to below 1.5013 %
- 1.50 and above4 %
Building height
Of the 1’701 parcels with a value, half lie between 8.7 m and 11.8 m. The median is 10.2 m and the mean 10.5 m.
Share of parcels by range
- below 8 m14 %
- 8 m to below 12 m64 %
- 12 m to below 20 m22 %
- 20 m and above< 1 %
Number of floors
Of the 1’337 parcels with a value, half lie between 2.0 and 3.3. The median is 2.7 and the mean 2.7.
Share of parcels by range
- below 28 %
- 2 to below 333 %
- 3 to below 553 %
- 5 and above6 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 2’266 | 109 % |
| Last 60 years | 1’376 | 130 % |
| Last 40 years | 1’061 | 133 % |
| Last 20 years | 415 | 135 % |
| Last 15 years | 258 | 138 % |
| Last 10 years | 143 | 133 % |
| Last 5 years | 50 | 103 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).