Wünnewil-Flamatt: observed built density
Municipality in the canton of Fribourg · FSO no. 2309 · Parcel data as of July 2025
The parcel data covers only part of the land in the canton of Fribourg, so figures here may be incomplete.
- Parcels
- 1’136
1 % of the canton
- Municipal zones
- 15
- Median utilization
- 86 %
Canton: 86 %
Switzerland: 10 %
- Median GFZ
- 0.48
Canton: 0.36
Switzerland: 0.09
- Median height
- 9.1 m
Canton: 8.9 m
Switzerland: 9.5 m
- Median floors
- 2.4
Canton: 2.3
Switzerland: 2.3
About Wünnewil-Flamatt
Wünnewil-Flamatt is a municipality in the canton of Fribourg. The parcel data lists 1’136 parcels in 15 municipal zone types. The zone types with the most parcels are Wohnzonen niedere Dichte (562), Wohnzone mittlere Dichte (300) and Arbeitszone Gewerbe 1 (46).
The median parcel is built to a volume utilization of 86 %; half of the parcels lie between 55 % and 132 %. The canton median is 86 %, close to the level of Wünnewil-Flamatt.
The median building height is 9.1 m at 2.4 floors, and the median floor-area ratio (GFZ) is 0.48. Parcels built in the last 20 years reach a mean volume utilization of 108 % (209 parcels), lower than the 125 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Wohnzonen niedere Dichte | 562 | 83 % |
| Wohnzone mittlere Dichte | 300 | 112 % |
| Arbeitszone Gewerbe 1 | 46 | 142 % |
| Mischzone | 44 | 63 % |
| Kernzone Wünnewil | 37 | 97 % |
| Zone von allgemeinem Interesse | 30 | 59 % |
| Kernzone Einkauf | 27 | 1’549 % |
| Kerzone Flamatt | 24 | 46 % |
| Arbeitszone Industrie | 18 | 24 % |
| Schutzzone Sensebrücke | 17 | 77 % |
| Freihaltezone | 12 | 0 % |
| Arbeitszone Gewerbe 3 | 9 | 29 % |
| Other zones (3) | 10 | - |
Volume utilization (ratioV)
Of the 1’119 parcels with a value, half lie between 55 % and 132 %. The median is 86 % and the mean 120 %.
Share of parcels by range
- below 50 %22 %
- 50 % to below 100 %37 %
- 100 % to below 150 %21 %
- 150 % and above20 %
Floor-area ratio (GFZ)
Of the 1’118 parcels with a value, half lie between 0.30 and 0.74. The median is 0.48 and the mean 0.53.
Share of parcels by range
- below 0.5053 %
- 0.50 to below 1.0035 %
- 1.00 to below 1.5010 %
- 1.50 and above1 %
Building height
Of the 949 parcels with a value, half lie between 7.9 m and 10.7 m. The median is 9.1 m and the mean 9.4 m.
Share of parcels by range
- below 8 m26 %
- 8 m to below 12 m61 %
- 12 m to below 20 m13 %
- 20 m and above< 1 %
Number of floors
Of the 694 parcels with a value, half lie between 1.9 and 3.0. The median is 2.4 and the mean 2.4.
Share of parcels by range
- below 25 %
- 2 to below 352 %
- 3 to below 542 %
- 5 and above< 1 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 1’136 | 125 % |
| Last 60 years | 731 | 126 % |
| Last 40 years | 574 | 119 % |
| Last 20 years | 209 | 108 % |
| Last 15 years | 134 | 116 % |
| Last 10 years | 78 | 127 % |
| Last 5 years | 34 | 119 % |
Open the map at Wünnewil-Flamatt
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).