Mont-Vully: observed built density
Municipality in the canton of Fribourg · FSO no. 2284 · Parcel data as of July 2025
The parcel data covers only part of the land in the canton of Fribourg, so figures here may be incomplete.
- Parcels
- 1’828
2 % of the canton
- Municipal zones
- 24
- Median utilization
- 83 %
Canton: 86 %
Switzerland: 10 %
- Median GFZ
- 0.35
Canton: 0.36
Switzerland: 0.09
- Median height
- 8.9 m
Canton: 8.9 m
Switzerland: 9.5 m
- Median floors
- 2.2
Canton: 2.3
Switzerland: 2.3
About Mont-Vully
Mont-Vully is a municipality in the canton of Fribourg. The parcel data lists 1’828 parcels in 24 municipal zone types. The zone types with the most parcels are Zone résidentielle à faible densité (506), Zone résidentielle à faible densité 1 (414) and Zone Village (282).
The median parcel is built to a volume utilization of 83 %; half of the parcels lie between 36 % and 127 %. The canton median is 86 %, close to the level of Mont-Vully.
The median building height is 8.9 m at 2.2 floors, and the median floor-area ratio (GFZ) is 0.35. Parcels built in the last 20 years reach a mean volume utilization of 123 % (341 parcels), higher than the 102 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Zone résidentielle à faible densité | 506 | 79 % |
| Zone résidentielle à faible densité 1 | 414 | 77 % |
| Zone Village | 282 | 119 % |
| Zone de village I | 219 | 96 % |
| Zone de structuration du tissu construit | 107 | 81 % |
| Zone résidlentielle à faible densité 2 | 67 | 76 % |
| Zone mixte | 34 | 83 % |
| Zone de protection des rives du lac | 32 | 54 % |
| Zone résidentielle à moyenne densité | 32 | 23 % |
| Zone d'activités | 29 | 85 % |
| Zone libre | 28 | 354 % |
| Zone d'intérêt général | 16 | 4 % |
| Other zones (12) | 62 | - |
Volume utilization (ratioV)
Of the 1’798 parcels with a value, half lie between 36 % and 127 %. The median is 83 % and the mean 97 %.
Share of parcels by range
- below 50 %30 %
- 50 % to below 100 %32 %
- 100 % to below 150 %21 %
- 150 % and above17 %
Floor-area ratio (GFZ)
Of the 1’798 parcels with a value, half lie between 0.13 and 0.58. The median is 0.35 and the mean 0.44.
Share of parcels by range
- below 0.5069 %
- 0.50 to below 1.0022 %
- 1.00 to below 1.506 %
- 1.50 and above3 %
Building height
Of the 1’434 parcels with a value, half lie between 7.1 m and 10.7 m. The median is 8.9 m and the mean 8.8 m.
Share of parcels by range
- below 8 m37 %
- 8 m to below 12 m55 %
- 12 m to below 20 m8 %
- 20 m and above0 %
Number of floors
Of the 1’097 parcels with a value, half lie between 1.7 and 2.9. The median is 2.2 and the mean 2.3.
Share of parcels by range
- below 215 %
- 2 to below 348 %
- 3 to below 538 %
- 5 and above0 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 1’828 | 102 % |
| Last 60 years | 962 | 118 % |
| Last 40 years | 813 | 120 % |
| Last 20 years | 341 | 123 % |
| Last 15 years | 239 | 129 % |
| Last 10 years | 164 | 144 % |
| Last 5 years | 47 | 101 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).