roomOpen the map

Gibloux: observed built density

Municipality in the canton of Fribourg · FSO no. 2236 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Fribourg, so figures here may be incomplete.

Parcels
1’912

2 % of the canton

Municipal zones
44
Median utilization
86 %

Canton: 86 %

Switzerland: 10 %

Median GFZ
0.34

Canton: 0.36

Switzerland: 0.09

Median height
8.7 m

Canton: 8.9 m

Switzerland: 9.5 m

Median floors
2.2

Canton: 2.3

Switzerland: 2.3

About Gibloux

Gibloux is a municipality in the canton of Fribourg. The parcel data lists 1’912 parcels in 44 municipal zone types. The zone types with the most parcels are Zone résidentielle faible densité (532), Zone résidentielle à faible densité I (296) and Zone de centre village (236).

The median parcel is built to a volume utilization of 86 %; half of the parcels lie between 41 % and 114 %. The canton median is 86 %, close to the level of Gibloux.

The median building height is 8.7 m at 2.2 floors, and the median floor-area ratio (GFZ) is 0.34. Parcels built in the last 20 years reach a mean volume utilization of 109 % (536 parcels), close to the 105 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zone résidentielle faible densité532-
Zone résidentielle à faible densité I29693 %
Zone de centre village23662 %
Zone de village12993 %
Zone de protection du site construit77109 %
Zone village6288 %
Zone de centre5475 %
Zone résidentielle à densité répartie4970 %
Zone résidentielle spéciale4877 %
Zone centre village4486 %
Zone de gravière400 %
Zone résidentielle à moyenne densité38-
Other zones (29)307-

Volume utilization (ratioV)

Of the 1’866 parcels with a value, half lie between 41 % and 114 %. The median is 86 % and the mean 86 %.

0 %300 %+

Share of parcels by range

  • below 50 %27 %
  • 50 % to below 100 %36 %
  • 100 % to below 150 %27 %
  • 150 % and above10 %

Floor-area ratio (GFZ)

Of the 1’865 parcels with a value, half lie between 0.20 and 0.51. The median is 0.34 and the mean 0.39.

0.003.00+

Share of parcels by range

  • below 0.5074 %
  • 0.50 to below 1.0021 %
  • 1.00 to below 1.503 %
  • 1.50 and above2 %

Building height

Of the 1’404 parcels with a value, half lie between 7.3 m and 9.9 m. The median is 8.7 m and the mean 8.9 m.

0 m60 m+

Share of parcels by range

  • below 8 m36 %
  • 8 m to below 12 m56 %
  • 12 m to below 20 m9 %
  • 20 m and above< 1 %

Number of floors

Of the 1’063 parcels with a value, half lie between 1.8 and 2.8. The median is 2.2 and the mean 2.3.

016+

Share of parcels by range

  • below 29 %
  • 2 to below 357 %
  • 3 to below 534 %
  • 5 and above< 1 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’912105 %
Last 60 years1’249104 %
Last 40 years1’055107 %
Last 20 years536109 %
Last 15 years355117 %
Last 10 years233129 %
Last 5 years136133 %

Open the map at Gibloux

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).