roomOpen the map

Varen: observed built density

Municipality in the canton of Valais · FSO no. 6116 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Valais, so figures here may be incomplete.

Parcels
3’177

1 % of the canton

Municipal zones
23
Median utilization
6 %

Canton: 7 %

Switzerland: 10 %

Median GFZ
0.06

Canton: 0.07

Switzerland: 0.09

Median height
8.4 m

Canton: 8.4 m

Switzerland: 9.5 m

Median floors
2.1

Canton: 2.3

Switzerland: 2.3

About Varen

Varen is a municipality in the canton of Valais. The parcel data lists 3’177 parcels in 23 municipal zone types. The zone types with the most parcels are Rebbau (1’466), Landwirtschaftzone 2. Priorität (357) and Wohnzone W2A (272).

The median parcel is built to a volume utilization of 6 %; half of the parcels lie between 3 % and 9 %. The canton median is 7 %, so Varen sits below it.

The median building height is 8.4 m at 2.1 floors, and the median floor-area ratio (GFZ) is 0.06. Parcels built in the last 20 years reach a mean volume utilization of 121 % (61 parcels), higher than the 50 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Rebbau1’4660 %
Landwirtschaftzone 2. Priorität3570 %
Wohnzone W2A27277 %
Dorfzone265122 %
Wald (provisorisch)2550 %
Verkehr (Strassen, Wege, Plätze)1580 %
Baumbestände, Hecken, Feldgehölz1460 %
Wohnzone W210256 %
Ferienhauszone nach QP (Quartierplan)5178 %
Öffentliche Bauten und Anlagen190 %
Zone mit unbestimmter Nutzung160 %
-140 %
Other zones (11)56-

Volume utilization (ratioV)

Of the 3’149 parcels with a value, half lie between 3 % and 9 %. The median is 6 % and the mean 34 %.

0 %300 %+

Share of parcels by range

  • below 50 %86 %
  • 50 % to below 100 %3 %
  • 100 % to below 150 %4 %
  • 150 % and above7 %

Floor-area ratio (GFZ)

Of the 3’149 parcels with a value, half lie between 0.03 and 0.09. The median is 0.06 and the mean 0.17.

0.003.00+

Share of parcels by range

  • below 0.5089 %
  • 0.50 to below 1.004 %
  • 1.00 to below 1.503 %
  • 1.50 and above4 %

Building height

Of the 460 parcels with a value, half lie between 6.8 m and 10.2 m. The median is 8.4 m and the mean 8.5 m.

0 m60 m+

Share of parcels by range

  • below 8 m44 %
  • 8 m to below 12 m48 %
  • 12 m to below 20 m9 %
  • 20 m and above0 %

Number of floors

Of the 252 parcels with a value, half lie between 1.6 and 2.8. The median is 2.1 and the mean 2.2.

016+

Share of parcels by range

  • below 219 %
  • 2 to below 347 %
  • 3 to below 533 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years3’17750 %
Last 60 years243150 %
Last 40 years149151 %
Last 20 years61121 %
Last 15 years44116 %
Last 10 years27118 %
Last 5 years11139 %

Open the map at Varen

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).