roomOpen the map

Val de Bagnes: observed built density

Municipality in the canton of Valais · FSO no. 6037 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Valais, so figures here may be incomplete.

Parcels
27’039

5 % of the canton

Municipal zones
68
Median utilization
8 %

Canton: 7 %

Switzerland: 10 %

Median GFZ
0.08

Canton: 0.07

Switzerland: 0.09

Median height
8.9 m

Canton: 8.4 m

Switzerland: 9.5 m

Median floors
2.3

Canton: 2.3

Switzerland: 2.3

About Val de Bagnes

Val de Bagnes is a municipality in the canton of Valais. The parcel data lists 27’039 parcels in 68 municipal zone types. The zone types with the most parcels are Zone agricole 1 (5’851), Aire forestière (3’495) and Zone village (2’191).

The median parcel is built to a volume utilization of 8 %; half of the parcels lie between 4 % and 71 %. The canton median is 7 %, so Val de Bagnes sits above it.

The median building height is 8.9 m at 2.3 floors, and the median floor-area ratio (GFZ) is 0.08. Parcels built in the last 20 years reach a mean volume utilization of 121 % (864 parcels), higher than the 67 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zone agricole 15’8510 %
Aire forestière3’4950 %
Zone village2’19173 %
Zone touristique moyenne densité T31’91975 %
Zone agricole 21’8610 %
Zone touristique faible densité T41’69964 %
Zone résidentielle faible densité R31’69660 %
Zone tourisitique forte densité T290477 %
Zone agricole protégée8630 %
Zone village et extension village72859 %
Zone agricole protégée de Savoleyres6720 %
Zone extension village6690 %
Other zones (56)4’491-

Volume utilization (ratioV)

Of the 26’885 parcels with a value, half lie between 4 % and 71 %. The median is 8 % and the mean 57 %.

0 %300 %+

Share of parcels by range

  • below 50 %70 %
  • 50 % to below 100 %13 %
  • 100 % to below 150 %10 %
  • 150 % and above7 %

Floor-area ratio (GFZ)

Of the 26’858 parcels with a value, half lie between 0.04 and 0.57. The median is 0.08 and the mean 0.42.

0.003.00+

Share of parcels by range

  • below 0.5073 %
  • 0.50 to below 1.0012 %
  • 1.00 to below 1.505 %
  • 1.50 and above9 %

Building height

Of the 9’433 parcels with a value, half lie between 7.6 m and 10.2 m. The median is 8.9 m and the mean 9.1 m.

0 m60 m+

Share of parcels by range

  • below 8 m30 %
  • 8 m to below 12 m59 %
  • 12 m to below 20 m10 %
  • 20 m and above< 1 %

Number of floors

Of the 2’382 parcels with a value, half lie between 1.8 and 3.0. The median is 2.3 and the mean 2.4.

016+

Share of parcels by range

  • below 29 %
  • 2 to below 348 %
  • 3 to below 542 %
  • 5 and above< 1 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years27’03967 %
Last 60 years1’775125 %
Last 40 years1’431122 %
Last 20 years864121 %
Last 15 years703115 %
Last 10 years270109 %
Last 5 years9098 %

Open the map at Val de Bagnes

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).