roomOpen the map

Anniviers: observed built density

Municipality in the canton of Valais · FSO no. 6252 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Valais, so figures here may be incomplete.

Parcels
13’383

2 % of the canton

Municipal zones
82
Median utilization
7 %

Canton: 7 %

Switzerland: 10 %

Median GFZ
0.07

Canton: 0.07

Switzerland: 0.09

Median height
8.8 m

Canton: 8.4 m

Switzerland: 9.5 m

Median floors
2.4

Canton: 2.3

Switzerland: 2.3

About Anniviers

Anniviers is a municipality in the canton of Valais. The parcel data lists 13’383 parcels in 82 municipal zone types. The zone types with the most parcels are Aire forestière (2’189), Zone agricole de pâturage (1’625) and Zone d'habitation individuelle H40 (940).

The median parcel is built to a volume utilization of 7 %; half of the parcels lie between 4 % and 35 %. The canton median is 7 %, close to the level of Anniviers.

The median building height is 8.8 m at 2.4 floors, and the median floor-area ratio (GFZ) is 0.07. Parcels built in the last 20 years reach a mean volume utilization of 112 % (494 parcels), higher than the 39 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Aire forestière2’1890 %
Zone agricole de pâturage1’6250 %
Zone d'habitation individuelle H4094022 %
Zone agricole de pâturages8800 %
Zone agricole8020 %
Zone d'habitations individuelles 0.30642-
Zone agricole protégée6380 %
Zone du centre des villages58893 %
Zone de petits chalets 0.304980 %
Zone agricole de pâturages et d'alpage4750 %
Zone village36375 %
Zone du village29028 %
Other zones (68)3’453-

Volume utilization (ratioV)

Of the 13’263 parcels with a value, half lie between 4 % and 35 %. The median is 7 % and the mean 34 %.

0 %300 %+

Share of parcels by range

  • below 50 %78 %
  • 50 % to below 100 %10 %
  • 100 % to below 150 %6 %
  • 150 % and above7 %

Floor-area ratio (GFZ)

Of the 13’263 parcels with a value, half lie between 0.03 and 0.14. The median is 0.07 and the mean 0.19.

0.003.00+

Share of parcels by range

  • below 0.5088 %
  • 0.50 to below 1.006 %
  • 1.00 to below 1.503 %
  • 1.50 and above3 %

Building height

Of the 3’842 parcels with a value, half lie between 7.2 m and 10.5 m. The median is 8.8 m and the mean 9.0 m.

0 m60 m+

Share of parcels by range

  • below 8 m36 %
  • 8 m to below 12 m53 %
  • 12 m to below 20 m10 %
  • 20 m and above< 1 %

Number of floors

Of the 2’704 parcels with a value, half lie between 1.9 and 3.1. The median is 2.4 and the mean 2.5.

016+

Share of parcels by range

  • below 26 %
  • 2 to below 348 %
  • 3 to below 544 %
  • 5 and above3 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years13’38339 %
Last 60 years1’823106 %
Last 40 years1’255107 %
Last 20 years494112 %
Last 15 years264112 %
Last 10 years148108 %
Last 5 years66103 %

Open the map at Anniviers

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).