Villorsonnens: observed built density
Municipality in the canton of Fribourg · FSO no. 2114 · Parcel data as of July 2025
The parcel data covers only part of the land in the canton of Fribourg, so figures here may be incomplete.
- Parcels
- 571
1 % of the canton
- Municipal zones
- 9
- Median utilization
- 78 %
Canton: 86 %
Switzerland: 10 %
- Median GFZ
- 0.29
Canton: 0.36
Switzerland: 0.09
- Median height
- 8.9 m
Canton: 8.9 m
Switzerland: 9.5 m
- Median floors
- 2.1
Canton: 2.3
Switzerland: 2.3
About Villorsonnens
Villorsonnens is a municipality in the canton of Fribourg. The parcel data lists 571 parcels in 9 municipal zone types. The zone types with the most parcels are Zone village (343), Zone résidentielle faible densité (200) and Zone d'activité (10).
The median parcel is built to a volume utilization of 78 %; half of the parcels lie between 8 % and 119 %. The canton median is 86 %, close to the level of Villorsonnens.
The median building height is 8.9 m at 2.1 floors, and the median floor-area ratio (GFZ) is 0.29. Parcels built in the last 20 years reach a mean volume utilization of 113 % (142 parcels), higher than the 101 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Zone village | 343 | 65 % |
| Zone résidentielle faible densité | 200 | 91 % |
| Zone d'activité | 10 | 80 % |
| Zone d'intérêt général 1 | 7 | 0 % |
| Zone mixte | 5 | 106 % |
| Zone d'activité "Orsoporc" a prescriptions spéciales | 3 | 86 % |
| Zone d'intérêt général 2 | 1 | 100 % |
| Zone d'intérêt général 3 | 1 | 100 % |
| Zone d'intérêt général 4 | 1 | 0 % |
Volume utilization (ratioV)
Of the 561 parcels with a value, half lie between 8 % and 119 %. The median is 78 % and the mean 97 %.
Share of parcels by range
- below 50 %35 %
- 50 % to below 100 %29 %
- 100 % to below 150 %20 %
- 150 % and above16 %
Floor-area ratio (GFZ)
Of the 561 parcels with a value, half lie between 0.08 and 0.47. The median is 0.29 and the mean 0.42.
Share of parcels by range
- below 0.5078 %
- 0.50 to below 1.0012 %
- 1.00 to below 1.504 %
- 1.50 and above6 %
Building height
Of the 381 parcels with a value, half lie between 7.4 m and 10.5 m. The median is 8.9 m and the mean 9.1 m.
Share of parcels by range
- below 8 m32 %
- 8 m to below 12 m57 %
- 12 m to below 20 m10 %
- 20 m and above0 %
Number of floors
Of the 268 parcels with a value, half lie between 1.7 and 2.5. The median is 2.1 and the mean 2.2.
Share of parcels by range
- below 28 %
- 2 to below 370 %
- 3 to below 522 %
- 5 and above0 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 571 | 101 % |
| Last 60 years | 274 | 104 % |
| Last 40 years | 241 | 107 % |
| Last 20 years | 142 | 113 % |
| Last 15 years | 106 | 124 % |
| Last 10 years | 64 | 130 % |
| Last 5 years | 28 | 148 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).