roomOpen the map

Val-de-Charmey: observed built density

Municipality in the canton of Fribourg · FSO no. 2163 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Fribourg, so figures here may be incomplete.

Parcels
1’084

1 % of the canton

Municipal zones
15
Median utilization
80 %

Canton: 86 %

Switzerland: 10 %

Median GFZ
0.31

Canton: 0.36

Switzerland: 0.09

Median height
9.2 m

Canton: 8.9 m

Switzerland: 9.5 m

Median floors
2.3

Canton: 2.3

Switzerland: 2.3

About Val-de-Charmey

Val-de-Charmey is a municipality in the canton of Fribourg. The parcel data lists 1’084 parcels in 15 municipal zone types. The zone types with the most parcels are Zone résidentielle à faible densité (585), Zone de Village B (279) and Zone de Village A (61).

The median parcel is built to a volume utilization of 80 %; half of the parcels lie between 45 % and 116 %. The canton median is 86 %, close to the level of Val-de-Charmey.

The median building height is 9.2 m at 2.3 floors, and the median floor-area ratio (GFZ) is 0.31. Parcels built in the last 20 years reach a mean volume utilization of 109 % (208 parcels), higher than the 91 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zone résidentielle à faible densité58575 %
Zone de Village B27992 %
Zone de Village A61129 %
Zone résidentielle à moyenne densité I3290 %
Zone de village C28102 %
Zone d'intérêt général2640 %
Zone d'activités2194 %
Zone mixte1877 %
Zone résidentielle à moyenne densité II1568 %
Zone libre80 %
Zone d'extraction des matériaux30 %
Zone du couvent398 %
Other zones (3)5-

Volume utilization (ratioV)

Of the 1’065 parcels with a value, half lie between 45 % and 116 %. The median is 80 % and the mean 88 %.

0 %300 %+

Share of parcels by range

  • below 50 %28 %
  • 50 % to below 100 %36 %
  • 100 % to below 150 %22 %
  • 150 % and above14 %

Floor-area ratio (GFZ)

Of the 1’065 parcels with a value, half lie between 0.16 and 0.49. The median is 0.31 and the mean 0.39.

0.003.00+

Share of parcels by range

  • below 0.5076 %
  • 0.50 to below 1.0017 %
  • 1.00 to below 1.504 %
  • 1.50 and above3 %

Building height

Of the 855 parcels with a value, half lie between 7.9 m and 10.9 m. The median is 9.2 m and the mean 9.5 m.

0 m60 m+

Share of parcels by range

  • below 8 m26 %
  • 8 m to below 12 m62 %
  • 12 m to below 20 m12 %
  • 20 m and above< 1 %

Number of floors

Of the 648 parcels with a value, half lie between 1.9 and 3.0. The median is 2.3 and the mean 2.4.

016+

Share of parcels by range

  • below 26 %
  • 2 to below 352 %
  • 3 to below 542 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’08491 %
Last 60 years61699 %
Last 40 years468105 %
Last 20 years208109 %
Last 15 years128119 %
Last 10 years64129 %
Last 5 years35125 %

Open the map at Val-de-Charmey

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).