roomOpen the map

Schmitten (FR): observed built density

Municipality in the canton of Fribourg · FSO no. 2305 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Fribourg, so figures here may be incomplete.

Parcels
986

1 % of the canton

Municipal zones
16
Median utilization
94 %

Canton: 86 %

Switzerland: 10 %

Median GFZ
0.44

Canton: 0.36

Switzerland: 0.09

Median height
9.2 m

Canton: 8.9 m

Switzerland: 9.5 m

Median floors
2.3

Canton: 2.3

Switzerland: 2.3

About Schmitten (FR)

Schmitten (FR) is a municipality in the canton of Fribourg. The parcel data lists 986 parcels in 16 municipal zone types. The zone types with the most parcels are Wohnzone schwacher Dichte (526), Mischzone I (199) and Wohnzone mittlerer Dichte (52).

The median parcel is built to a volume utilization of 94 %; half of the parcels lie between 65 % and 129 %. The canton median is 86 %, so Schmitten (FR) sits above it.

The median building height is 9.2 m at 2.3 floors, and the median floor-area ratio (GFZ) is 0.44. Parcels built in the last 20 years reach a mean volume utilization of 124 % (217 parcels), lower than the 247 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Wohnzone schwacher Dichte52695 %
Mischzone I19994 %
Wohnzone mittlerer Dichte521’809 %
Mischzone II4098 %
Wohnzone mittlerer Dichte a3764 %
Kernzone b3571 %
Kernzone a3375 %
Industrie-und Gewerbezone2661 %
Wohnzone hoher Dichte93’929 %
Zone von allgemeinem Interesse 18298 %
Zone von allgemeinem Interesse 2727 %
Mischzone III674 %
Other zones (4)8-

Volume utilization (ratioV)

Of the 968 parcels with a value, half lie between 65 % and 129 %. The median is 94 % and the mean 220 %.

0 %300 %+

Share of parcels by range

  • below 50 %19 %
  • 50 % to below 100 %37 %
  • 100 % to below 150 %25 %
  • 150 % and above19 %

Floor-area ratio (GFZ)

Of the 968 parcels with a value, half lie between 0.31 and 0.62. The median is 0.44 and the mean 0.50.

0.003.00+

Share of parcels by range

  • below 0.5063 %
  • 0.50 to below 1.0030 %
  • 1.00 to below 1.506 %
  • 1.50 and above2 %

Building height

Of the 815 parcels with a value, half lie between 8.1 m and 10.5 m. The median is 9.2 m and the mean 9.3 m.

0 m60 m+

Share of parcels by range

  • below 8 m24 %
  • 8 m to below 12 m68 %
  • 12 m to below 20 m8 %
  • 20 m and above< 1 %

Number of floors

Of the 601 parcels with a value, half lie between 1.8 and 2.9. The median is 2.3 and the mean 2.4.

016+

Share of parcels by range

  • below 28 %
  • 2 to below 352 %
  • 3 to below 539 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years986247 %
Last 60 years698276 %
Last 40 years580203 %
Last 20 years217124 %
Last 15 years126129 %
Last 10 years74140 %
Last 5 years29113 %

Open the map at Schmitten (FR)

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).