Remaufens: observed built density
Municipality in the canton of Fribourg · FSO no. 2333 · Parcel data as of July 2025
The parcel data covers only part of the land in the canton of Fribourg, so figures here may be incomplete.
- Parcels
- 342
< 1 % of the canton
- Municipal zones
- 11
- Median utilization
- 92 %
Canton: 86 %
Switzerland: 10 %
- Median GFZ
- 0.34
Canton: 0.36
Switzerland: 0.09
- Median height
- 8.8 m
Canton: 8.9 m
Switzerland: 9.5 m
- Median floors
- 2.4
Canton: 2.3
Switzerland: 2.3
About Remaufens
Remaufens is a municipality in the canton of Fribourg. The parcel data lists 342 parcels in 11 municipal zone types. The zone types with the most parcels are Zone résidentielle à faible densité (233), Zone de village (79) and Zone d’activités (14).
The median parcel is built to a volume utilization of 92 %; half of the parcels lie between 59 % and 132 %. The canton median is 86 %, close to the level of Remaufens.
The median building height is 8.8 m at 2.4 floors, and the median floor-area ratio (GFZ) is 0.34. Parcels built in the last 20 years reach a mean volume utilization of 110 % (121 parcels), close to the 111 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Zone résidentielle à faible densité | 233 | 90 % |
| Zone de village | 79 | 102 % |
| Zone d’activités | 14 | - |
| Zone d’intérêt général I | 4 | 20 % |
| Zone résidentielle à moyenne densité | 4 | 130 % |
| Zone de décharge | 2 | 0 % |
| Zone d’intérêt général II | 2 | 50 % |
| Zone mixte | 2 | 50 % |
| Zone d’intérêt général III | 1 | 100 % |
| Zone libre | 1 | 0 % |
Volume utilization (ratioV)
Of the 328 parcels with a value, half lie between 59 % and 132 %. The median is 92 % and the mean 105 %.
Share of parcels by range
- below 50 %23 %
- 50 % to below 100 %33 %
- 100 % to below 150 %25 %
- 150 % and above19 %
Floor-area ratio (GFZ)
Of the 328 parcels with a value, half lie between 0.21 and 0.49. The median is 0.34 and the mean 0.39.
Share of parcels by range
- below 0.5077 %
- 0.50 to below 1.0018 %
- 1.00 to below 1.505 %
- 1.50 and above1 %
Building height
Of the 257 parcels with a value, half lie between 7.6 m and 9.8 m. The median is 8.8 m and the mean 8.9 m.
Share of parcels by range
- below 8 m31 %
- 8 m to below 12 m65 %
- 12 m to below 20 m5 %
- 20 m and above0 %
Number of floors
Of the 205 parcels with a value, half lie between 1.9 and 3.0. The median is 2.4 and the mean 2.4.
Share of parcels by range
- below 25 %
- 2 to below 352 %
- 3 to below 540 %
- 5 and above2 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 342 | 111 % |
| Last 60 years | 232 | 111 % |
| Last 40 years | 203 | 110 % |
| Last 20 years | 121 | 110 % |
| Last 15 years | 82 | 119 % |
| Last 10 years | 50 | 131 % |
| Last 5 years | 23 | 116 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).