Rechthalten: observed built density
Municipality in the canton of Fribourg · FSO no. 2301 · Parcel data as of July 2025
The parcel data covers only part of the land in the canton of Fribourg, so figures here may be incomplete.
- Parcels
- 314
< 1 % of the canton
- Municipal zones
- 9
- Median utilization
- 90 %
Canton: 86 %
Switzerland: 10 %
- Median GFZ
- 0.38
Canton: 0.36
Switzerland: 0.09
- Median height
- 9.1 m
Canton: 8.9 m
Switzerland: 9.5 m
- Median floors
- 2.2
Canton: 2.3
Switzerland: 2.3
About Rechthalten
Rechthalten is a municipality in the canton of Fribourg. The parcel data lists 314 parcels in 9 municipal zone types. The zone types with the most parcels are Wohnzone mit schwacher Dichte I (190), Kernzone (35) and Wohnzone mit schwacher Dichte III (24).
The median parcel is built to a volume utilization of 90 %; half of the parcels lie between 51 % and 115 %. The canton median is 86 %, close to the level of Rechthalten.
The median building height is 9.1 m at 2.2 floors, and the median floor-area ratio (GFZ) is 0.38. Parcels built in the last 20 years reach a mean volume utilization of 101 % (72 parcels), higher than the 86 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Wohnzone mit schwacher Dichte I | 190 | 91 % |
| Kernzone | 35 | 62 % |
| Wohnzone mit schwacher Dichte III | 24 | 113 % |
| Mischzone Wohnen-Gewerbe | 22 | 71 % |
| Wohnzone mit mittlerer Dichte | 11 | 100 % |
| Wohnzone mit schwacher Dichte II | 11 | 94 % |
| Wohnzone mit schwacher Dichte IV | 8 | 104 % |
| Zone von allgemeinem Interesse | 8 | 53 % |
| Arbeitszone | 5 | 50 % |
Volume utilization (ratioV)
Of the 302 parcels with a value, half lie between 51 % and 115 %. The median is 90 % and the mean 83 %.
Share of parcels by range
- below 50 %24 %
- 50 % to below 100 %36 %
- 100 % to below 150 %32 %
- 150 % and above8 %
Floor-area ratio (GFZ)
Of the 302 parcels with a value, half lie between 0.24 and 0.51. The median is 0.38 and the mean 0.40.
Share of parcels by range
- below 0.5073 %
- 0.50 to below 1.0023 %
- 1.00 to below 1.503 %
- 1.50 and above1 %
Building height
Of the 246 parcels with a value, half lie between 8.0 m and 10.4 m. The median is 9.1 m and the mean 9.3 m.
Share of parcels by range
- below 8 m24 %
- 8 m to below 12 m70 %
- 12 m to below 20 m7 %
- 20 m and above0 %
Number of floors
Of the 192 parcels with a value, half lie between 1.8 and 2.8. The median is 2.2 and the mean 2.3.
Share of parcels by range
- below 28 %
- 2 to below 357 %
- 3 to below 535 %
- 5 and above0 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 314 | 86 % |
| Last 60 years | 211 | 106 % |
| Last 40 years | 177 | 108 % |
| Last 20 years | 72 | 101 % |
| Last 15 years | 50 | 107 % |
| Last 10 years | 31 | 121 % |
| Last 5 years | 12 | 121 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).