roomOpen the map

Pont-en-Ogoz: observed built density

Municipality in the canton of Fribourg · FSO no. 2122 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Fribourg, so figures here may be incomplete.

Parcels
615

1 % of the canton

Municipal zones
22
Median utilization
81 %

Canton: 86 %

Switzerland: 10 %

Median GFZ
0.31

Canton: 0.36

Switzerland: 0.09

Median height
8.9 m

Canton: 8.9 m

Switzerland: 9.5 m

Median floors
2.3

Canton: 2.3

Switzerland: 2.3

About Pont-en-Ogoz

Pont-en-Ogoz is a municipality in the canton of Fribourg. The parcel data lists 615 parcels in 22 municipal zone types. The zone types with the most parcels are Zone résidentielle faible densité (Gumefens) (206), Zone résidentielle (150) and Zone d'habitation individuelle et groupée (43).

The median parcel is built to a volume utilization of 81 %; half of the parcels lie between 42 % and 115 %. The canton median is 86 %, close to the level of Pont-en-Ogoz.

The median building height is 8.9 m at 2.3 floors, and the median floor-area ratio (GFZ) is 0.31. Parcels built in the last 20 years reach a mean volume utilization of 105 % (136 parcels), higher than the 95 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zone résidentielle faible densité (Gumefens)20683 %
Zone résidentielle15089 %
Zone d'habitation individuelle et groupée4369 %
Zone centre village (Gumefens)29110 %
Zone mixte (Gumefens)2649 %
Zone village24116 %
Zone de village20106 %
Zone d'habitation individuelle1784 %
Zone d'intérêt général1534 %
Zone mixte1376 %
PQ "Cité d'Ogoz"1117 %
Zone d'activités1180 %
Other zones (10)50-

Volume utilization (ratioV)

Of the 588 parcels with a value, half lie between 42 % and 115 %. The median is 81 % and the mean 90 %.

0 %300 %+

Share of parcels by range

  • below 50 %28 %
  • 50 % to below 100 %35 %
  • 100 % to below 150 %25 %
  • 150 % and above12 %

Floor-area ratio (GFZ)

Of the 588 parcels with a value, half lie between 0.14 and 0.47. The median is 0.31 and the mean 0.36.

0.003.00+

Share of parcels by range

  • below 0.5079 %
  • 0.50 to below 1.0018 %
  • 1.00 to below 1.502 %
  • 1.50 and above1 %

Building height

Of the 468 parcels with a value, half lie between 7.6 m and 10.0 m. The median is 8.9 m and the mean 9.0 m.

0 m60 m+

Share of parcels by range

  • below 8 m30 %
  • 8 m to below 12 m63 %
  • 12 m to below 20 m7 %
  • 20 m and above0 %

Number of floors

Of the 332 parcels with a value, half lie between 1.8 and 2.8. The median is 2.3 and the mean 2.3.

016+

Share of parcels by range

  • below 27 %
  • 2 to below 356 %
  • 3 to below 536 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years61595 %
Last 60 years404113 %
Last 40 years335117 %
Last 20 years136105 %
Last 15 years101110 %
Last 10 years48122 %
Last 5 years19110 %

Open the map at Pont-en-Ogoz

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).