Muntelier: observed built density
Municipality in the canton of Fribourg · FSO no. 2274 · Parcel data as of July 2025
The parcel data covers only part of the land in the canton of Fribourg, so figures here may be incomplete.
- Parcels
- 396
1 % of the canton
- Municipal zones
- 11
- Median utilization
- 80 %
Canton: 86 %
Switzerland: 10 %
- Median GFZ
- 0.46
Canton: 0.36
Switzerland: 0.09
- Median height
- 9.0 m
Canton: 8.9 m
Switzerland: 9.5 m
- Median floors
- 2.4
Canton: 2.3
Switzerland: 2.3
About Muntelier
Muntelier is a municipality in the canton of Fribourg. The parcel data lists 396 parcels in 11 municipal zone types. The zone types with the most parcels are Wohnzone schwacher Dichte (296), Kernzone A (24) and Arbeitszone B (21).
The median parcel is built to a volume utilization of 80 %; half of the parcels lie between 44 % and 119 %. The canton median is 86 %, close to the level of Muntelier.
The median building height is 9.0 m at 2.4 floors, and the median floor-area ratio (GFZ) is 0.46. Parcels built in the last 20 years reach a mean volume utilization of 98 % (64 parcels), lower than the 154 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Wohnzone schwacher Dichte | 296 | 77 % |
| Kernzone A | 24 | 101 % |
| Arbeitszone B | 21 | 411 % |
| Kernzone B | 21 | 181 % |
| Zone von allgemeinem Interesse | 9 | 3 % |
| Wohnzone mittlerer Dichte | 7 | 78 % |
| Arbeitszone A | 5 | 116 % |
| Mischzone | 5 | 67 % |
| Schutzzone Murtensee | 5 | 16 % |
| Schutzzone Schloss | 2 | 50 % |
| Freihaltezone | 1 | 100 % |
Volume utilization (ratioV)
Of the 382 parcels with a value, half lie between 44 % and 119 %. The median is 80 % and the mean 139 %.
Share of parcels by range
- below 50 %27 %
- 50 % to below 100 %37 %
- 100 % to below 150 %19 %
- 150 % and above17 %
Floor-area ratio (GFZ)
Of the 382 parcels with a value, half lie between 0.23 and 0.74. The median is 0.46 and the mean 0.51.
Share of parcels by range
- below 0.5057 %
- 0.50 to below 1.0028 %
- 1.00 to below 1.5014 %
- 1.50 and above2 %
Building height
Of the 300 parcels with a value, half lie between 7.8 m and 10.3 m. The median is 9.0 m and the mean 9.1 m.
Share of parcels by range
- below 8 m27 %
- 8 m to below 12 m65 %
- 12 m to below 20 m8 %
- 20 m and above0 %
Number of floors
Of the 220 parcels with a value, half lie between 1.9 and 3.0. The median is 2.4 and the mean 2.4.
Share of parcels by range
- below 25 %
- 2 to below 348 %
- 3 to below 546 %
- 5 and above0 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 396 | 154 % |
| Last 60 years | 237 | 185 % |
| Last 40 years | 161 | 203 % |
| Last 20 years | 64 | 98 % |
| Last 15 years | 40 | 91 % |
| Last 10 years | 21 | 104 % |
| Last 5 years | 8 | 92 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).