roomOpen the map

Gurmels: observed built density

Municipality in the canton of Fribourg · FSO no. 2262 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Fribourg, so figures here may be incomplete.

Parcels
1’536

2 % of the canton

Municipal zones
14
Median utilization
91 %

Canton: 86 %

Switzerland: 10 %

Median GFZ
0.37

Canton: 0.36

Switzerland: 0.09

Median height
8.9 m

Canton: 8.9 m

Switzerland: 9.5 m

Median floors
2.1

Canton: 2.3

Switzerland: 2.3

About Gurmels

Gurmels is a municipality in the canton of Fribourg. The parcel data lists 1’536 parcels in 14 municipal zone types. The zone types with the most parcels are Wohnzone schwacher Dichte (1’040), Dorfzone (239) and Mischzone (101).

The median parcel is built to a volume utilization of 91 %; half of the parcels lie between 60 % and 123 %. The canton median is 86 %, close to the level of Gurmels.

The median building height is 8.9 m at 2.1 floors, and the median floor-area ratio (GFZ) is 0.37. Parcels built in the last 20 years reach a mean volume utilization of 106 % (401 parcels), higher than the 95 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Wohnzone schwacher Dichte1’04092 %
Dorfzone23990 %
Mischzone101110 %
Wohnzone mittlerer Dichte72104 %
Industrie- und Gewertbezone4251 %
Zone von allgemeinem lnteresse2933 %
Uferschutzzone90 %
Spezialzone für Pferde250 %
Landwirtschaftszone10 %
Materialabbauzone10 %
Arbeitszone0-
Kernzone0-
Other zones (2)0-

Volume utilization (ratioV)

Of the 1’521 parcels with a value, half lie between 60 % and 123 %. The median is 91 % and the mean 93 %.

0 %300 %+

Share of parcels by range

  • below 50 %20 %
  • 50 % to below 100 %38 %
  • 100 % to below 150 %28 %
  • 150 % and above14 %

Floor-area ratio (GFZ)

Of the 1’521 parcels with a value, half lie between 0.24 and 0.51. The median is 0.37 and the mean 0.39.

0.003.00+

Share of parcels by range

  • below 0.5074 %
  • 0.50 to below 1.0024 %
  • 1.00 to below 1.502 %
  • 1.50 and above< 1 %

Building height

Of the 1’260 parcels with a value, half lie between 7.6 m and 10.0 m. The median is 8.9 m and the mean 8.9 m.

0 m60 m+

Share of parcels by range

  • below 8 m30 %
  • 8 m to below 12 m64 %
  • 12 m to below 20 m6 %
  • 20 m and above0 %

Number of floors

Of the 833 parcels with a value, half lie between 1.8 and 2.5. The median is 2.1 and the mean 2.2.

016+

Share of parcels by range

  • below 27 %
  • 2 to below 369 %
  • 3 to below 524 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’53695 %
Last 60 years1’096110 %
Last 40 years958113 %
Last 20 years401106 %
Last 15 years260113 %
Last 10 years137123 %
Last 5 years55132 %

Open the map at Gurmels

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).