Mézières (FR): observed built density
Municipality in the canton of Fribourg · FSO no. 2087 · Parcel data as of July 2025
The parcel data covers only part of the land in the canton of Fribourg, so figures here may be incomplete.
- Parcels
- 305
< 1 % of the canton
- Municipal zones
- 10
- Median utilization
- 84 %
Canton: 86 %
Switzerland: 10 %
- Median GFZ
- 0.31
Canton: 0.36
Switzerland: 0.09
- Median height
- 9.1 m
Canton: 8.9 m
Switzerland: 9.5 m
- Median floors
- 2.2
Canton: 2.3
Switzerland: 2.3
About Mézières (FR)
Mézières (FR) is a municipality in the canton of Fribourg. The parcel data lists 305 parcels in 10 municipal zone types. The zone types with the most parcels are Zone résidentielle faible densité (178), Zone village (90) and Zone résidentielle moyenne densité 1 (14).
The median parcel is built to a volume utilization of 84 %; half of the parcels lie between 54 % and 120 %. The canton median is 86 %, close to the level of Mézières (FR).
The median building height is 9.1 m at 2.2 floors, and the median floor-area ratio (GFZ) is 0.31. Parcels built in the last 20 years reach a mean volume utilization of 114 % (79 parcels), higher than the 100 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Zone résidentielle faible densité | 178 | 78 % |
| Zone village | 90 | 118 % |
| Zone résidentielle moyenne densité 1 | 14 | 82 % |
| Zone d'intérêt général b | 6 | 26 % |
| Zone d'activités | 5 | 76 % |
| Zone résidentielle moyenne densité 2 | 4 | 85 % |
| Zone mixte | 3 | 102 % |
| Zone d'intérêt général a | 2 | 50 % |
| Zone d'intérêt général c | 2 | 50 % |
| Zone Château | 1 | 100 % |
Volume utilization (ratioV)
Of the 293 parcels with a value, half lie between 54 % and 120 %. The median is 84 % and the mean 95 %.
Share of parcels by range
- below 50 %23 %
- 50 % to below 100 %38 %
- 100 % to below 150 %25 %
- 150 % and above14 %
Floor-area ratio (GFZ)
Of the 292 parcels with a value, half lie between 0.20 and 0.46. The median is 0.31 and the mean 0.36.
Share of parcels by range
- below 0.5080 %
- 0.50 to below 1.0017 %
- 1.00 to below 1.502 %
- 1.50 and above1 %
Building height
Of the 235 parcels with a value, half lie between 8.0 m and 10.3 m. The median is 9.1 m and the mean 9.2 m.
Share of parcels by range
- below 8 m25 %
- 8 m to below 12 m66 %
- 12 m to below 20 m10 %
- 20 m and above0 %
Number of floors
Of the 176 parcels with a value, half lie between 1.8 and 2.8. The median is 2.2 and the mean 2.3.
Share of parcels by range
- below 26 %
- 2 to below 362 %
- 3 to below 532 %
- 5 and above0 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 305 | 100 % |
| Last 60 years | 195 | 113 % |
| Last 40 years | 168 | 116 % |
| Last 20 years | 79 | 114 % |
| Last 15 years | 50 | 127 % |
| Last 10 years | 31 | 157 % |
| Last 5 years | 9 | 214 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).