Haut-Intyamon: observed built density
Municipality in the canton of Fribourg · FSO no. 2121 · Parcel data as of July 2025
The parcel data covers only part of the land in the canton of Fribourg, so figures here may be incomplete.
- Parcels
- 986
1 % of the canton
- Municipal zones
- 13
- Median utilization
- 90 %
Canton: 86 %
Switzerland: 10 %
- Median GFZ
- 0.28
Canton: 0.36
Switzerland: 0.09
- Median height
- 9.2 m
Canton: 8.9 m
Switzerland: 9.5 m
- Median floors
- 2.2
Canton: 2.3
Switzerland: 2.3
About Haut-Intyamon
Haut-Intyamon is a municipality in the canton of Fribourg. The parcel data lists 986 parcels in 13 municipal zone types. The zone types with the most parcels are Zone de protection du site construit (252), Zone résidentielle à faible densité (236) and Zone de village I (214).
The median parcel is built to a volume utilization of 90 %; half of the parcels lie between 7 % and 195 %. The canton median is 86 %, close to the level of Haut-Intyamon.
The median building height is 9.2 m at 2.2 floors, and the median floor-area ratio (GFZ) is 0.28. Parcels built in the last 20 years reach a mean volume utilization of 116 % (104 parcels), lower than the 163 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Zone de protection du site construit | 252 | 76 % |
| Zone résidentielle à faible densité | 236 | 89 % |
| Zone de village I | 214 | 121 % |
| Zone de village II | 168 | 88 % |
| Zone résidentielle à moyenne densité | 39 | 137 % |
| Zone d'intérêt général I | 29 | 0 % |
| Zone d'activités | 26 | 424 % |
| Zone libre | 13 | 0 % |
| Zone mixte | 5 | 96 % |
| Aire forestière 18 LAT | 1 | 0 % |
| Zone agricole 16 LAT | 1 | 0 % |
| Zone d'intérêt général II | 1 | 0 % |
| Other zones (1) | 1 | - |
Volume utilization (ratioV)
Of the 973 parcels with a value, half lie between 7 % and 195 %. The median is 90 % and the mean 154 %.
Share of parcels by range
- below 50 %40 %
- 50 % to below 100 %14 %
- 100 % to below 150 %14 %
- 150 % and above32 %
Floor-area ratio (GFZ)
Of the 973 parcels with a value, half lie between 0.07 and 0.90. The median is 0.28 and the mean 0.63.
Share of parcels by range
- below 0.5064 %
- 0.50 to below 1.0013 %
- 1.00 to below 1.508 %
- 1.50 and above15 %
Building height
Of the 617 parcels with a value, half lie between 7.4 m and 11.0 m. The median is 9.2 m and the mean 9.3 m.
Share of parcels by range
- below 8 m31 %
- 8 m to below 12 m56 %
- 12 m to below 20 m12 %
- 20 m and above< 1 %
Number of floors
Of the 428 parcels with a value, half lie between 1.8 and 2.7. The median is 2.2 and the mean 2.2.
Share of parcels by range
- below 28 %
- 2 to below 363 %
- 3 to below 529 %
- 5 and above0 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 986 | 163 % |
| Last 60 years | 259 | 142 % |
| Last 40 years | 198 | 133 % |
| Last 20 years | 104 | 116 % |
| Last 15 years | 81 | 116 % |
| Last 10 years | 42 | 108 % |
| Last 5 years | 25 | 110 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).