roomOpen the map

Giffers: observed built density

Municipality in the canton of Fribourg · FSO no. 2294 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Fribourg, so figures here may be incomplete.

Parcels
542

1 % of the canton

Municipal zones
10
Median utilization
80 %

Canton: 86 %

Switzerland: 10 %

Median GFZ
0.39

Canton: 0.36

Switzerland: 0.09

Median height
8.9 m

Canton: 8.9 m

Switzerland: 9.5 m

Median floors
2.1

Canton: 2.3

Switzerland: 2.3

About Giffers

Giffers is a municipality in the canton of Fribourg. The parcel data lists 542 parcels in 10 municipal zone types. The zone types with the most parcels are Wohnzone schwacher Dichte (324), Wohnzone mittlerer Dichte (78) and Mischzone (73).

The median parcel is built to a volume utilization of 80 %; half of the parcels lie between 57 % and 111 %. The canton median is 86 %, close to the level of Giffers.

The median building height is 8.9 m at 2.1 floors, and the median floor-area ratio (GFZ) is 0.39. Parcels built in the last 20 years reach a mean volume utilization of 105 % (161 parcels), higher than the 83 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Wohnzone schwacher Dichte32485 %
Wohnzone mittlerer Dichte7896 %
Mischzone7363 %
Kernzone 24466 %
Zone von allgemeinem Interesse 1844 %
Arbeitszone750 %
Kernzone 14100 %
Freihaltezone20 %
Zone von allgemeinem Interesse 210 %
Zone von allgemeinem Interesse 31100 %

Volume utilization (ratioV)

Of the 533 parcels with a value, half lie between 57 % and 111 %. The median is 80 % and the mean 81 %.

0 %300 %+

Share of parcels by range

  • below 50 %21 %
  • 50 % to below 100 %45 %
  • 100 % to below 150 %25 %
  • 150 % and above9 %

Floor-area ratio (GFZ)

Of the 533 parcels with a value, half lie between 0.26 and 0.54. The median is 0.39 and the mean 0.40.

0.003.00+

Share of parcels by range

  • below 0.5071 %
  • 0.50 to below 1.0027 %
  • 1.00 to below 1.502 %
  • 1.50 and above< 1 %

Building height

Of the 443 parcels with a value, half lie between 7.8 m and 9.9 m. The median is 8.9 m and the mean 9.1 m.

0 m60 m+

Share of parcels by range

  • below 8 m28 %
  • 8 m to below 12 m67 %
  • 12 m to below 20 m5 %
  • 20 m and above< 1 %

Number of floors

Of the 355 parcels with a value, half lie between 1.7 and 2.5. The median is 2.1 and the mean 2.1.

016+

Share of parcels by range

  • below 213 %
  • 2 to below 364 %
  • 3 to below 523 %
  • 5 and above< 1 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years54283 %
Last 60 years38299 %
Last 40 years307104 %
Last 20 years161105 %
Last 15 years126108 %
Last 10 years82116 %
Last 5 years24110 %

Open the map at Giffers

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).