roomOpen the map

Cugy (FR): observed built density

Municipality in the canton of Fribourg · FSO no. 2011 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Fribourg, so figures here may be incomplete.

Parcels
536

1 % of the canton

Municipal zones
13
Median utilization
95 %

Canton: 86 %

Switzerland: 10 %

Median GFZ
0.35

Canton: 0.36

Switzerland: 0.09

Median height
9.1 m

Canton: 8.9 m

Switzerland: 9.5 m

Median floors
2.2

Canton: 2.3

Switzerland: 2.3

About Cugy (FR)

Cugy (FR) is a municipality in the canton of Fribourg. The parcel data lists 536 parcels in 13 municipal zone types. The zone types with the most parcels are Zone résidentielle faible densité (272), Zone de centre (230) and Zone mixte (8).

The median parcel is built to a volume utilization of 95 %; half of the parcels lie between 67 % and 137 %. The canton median is 86 %, so Cugy (FR) sits above it.

The median building height is 9.1 m at 2.2 floors, and the median floor-area ratio (GFZ) is 0.35. Parcels built in the last 20 years reach a mean volume utilization of 114 % (143 parcels), close to the 116 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zone résidentielle faible densité27290 %
Zone de centre230120 %
Zone mixte8195 %
Zone d'activé628 %
Zone résidentielle moyenne densité4100 %
Zone d'intérêt général I33 %
Zone libre30 %
Zone d'intérêt général III2100 %
Zone d'intérêt général IV250 %
Zone d'intérêt général V2100 %
Zone de traitement de gravier et de matériaux de démolition250 %
Aire forestière 18 LAT10 %
Other zones (1)1-

Volume utilization (ratioV)

Of the 516 parcels with a value, half lie between 67 % and 137 %. The median is 95 % and the mean 111 %.

0 %300 %+

Share of parcels by range

  • below 50 %19 %
  • 50 % to below 100 %35 %
  • 100 % to below 150 %26 %
  • 150 % and above20 %

Floor-area ratio (GFZ)

Of the 516 parcels with a value, half lie between 0.23 and 0.55. The median is 0.35 and the mean 0.44.

0.003.00+

Share of parcels by range

  • below 0.5072 %
  • 0.50 to below 1.0019 %
  • 1.00 to below 1.506 %
  • 1.50 and above2 %

Building height

Of the 423 parcels with a value, half lie between 7.6 m and 10.9 m. The median is 9.1 m and the mean 9.5 m.

0 m60 m+

Share of parcels by range

  • below 8 m31 %
  • 8 m to below 12 m54 %
  • 12 m to below 20 m14 %
  • 20 m and above< 1 %

Number of floors

Of the 328 parcels with a value, half lie between 1.8 and 2.8. The median is 2.2 and the mean 2.3.

016+

Share of parcels by range

  • below 211 %
  • 2 to below 353 %
  • 3 to below 535 %
  • 5 and above1 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years536116 %
Last 60 years321112 %
Last 40 years266112 %
Last 20 years143114 %
Last 15 years96122 %
Last 10 years61124 %
Last 5 years35114 %

Open the map at Cugy (FR)

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).