Crésuz: observed built density
Municipality in the canton of Fribourg · FSO no. 2130 · Parcel data as of July 2025
The parcel data covers only part of the land in the canton of Fribourg, so figures here may be incomplete.
- Parcels
- 295
< 1 % of the canton
- Municipal zones
- 6
- Median utilization
- 78 %
Canton: 86 %
Switzerland: 10 %
- Median GFZ
- 0.24
Canton: 0.36
Switzerland: 0.09
- Median height
- 9.0 m
Canton: 8.9 m
Switzerland: 9.5 m
- Median floors
- 2.3
Canton: 2.3
Switzerland: 2.3
About Crésuz
Crésuz is a municipality in the canton of Fribourg. The parcel data lists 295 parcels in 6 municipal zone types. The zone types with the most parcels are Zone résidentielle faible densité (250), Zone village (40) and Zone d'intérêt général 4 (2).
The median parcel is built to a volume utilization of 78 %; half of the parcels lie between 51 % and 107 %. The canton median is 86 %, close to the level of Crésuz.
The median building height is 9.0 m at 2.3 floors, and the median floor-area ratio (GFZ) is 0.24. Parcels built in the last 20 years reach a mean volume utilization of 145 % (36 parcels), higher than the 89 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Zone résidentielle faible densité | 250 | 76 % |
| Zone village | 40 | 116 % |
| Zone d'intérêt général 4 | 2 | 50 % |
| Zone d'intérêt général 1/2/3 | 1 | 100 % |
| Zone d'intérêt général 3 | 1 | 0 % |
| Zone d'intérêt général 5 | 1 | 100 % |
Volume utilization (ratioV)
Of the 289 parcels with a value, half lie between 51 % and 107 %. The median is 78 % and the mean 85 %.
Share of parcels by range
- below 50 %25 %
- 50 % to below 100 %46 %
- 100 % to below 150 %17 %
- 150 % and above12 %
Floor-area ratio (GFZ)
Of the 289 parcels with a value, half lie between 0.14 and 0.36. The median is 0.24 and the mean 0.28.
Share of parcels by range
- below 0.5087 %
- 0.50 to below 1.0012 %
- 1.00 to below 1.501 %
- 1.50 and above0 %
Building height
Of the 238 parcels with a value, half lie between 8.2 m and 9.9 m. The median is 9.0 m and the mean 9.1 m.
Share of parcels by range
- below 8 m20 %
- 8 m to below 12 m76 %
- 12 m to below 20 m4 %
- 20 m and above0 %
Number of floors
Of the 203 parcels with a value, half lie between 1.9 and 2.9. The median is 2.3 and the mean 2.4.
Share of parcels by range
- below 24 %
- 2 to below 358 %
- 3 to below 538 %
- 5 and above0 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 295 | 89 % |
| Last 60 years | 164 | 101 % |
| Last 40 years | 107 | 109 % |
| Last 20 years | 36 | 145 % |
| Last 15 years | 27 | 166 % |
| Last 10 years | 19 | 193 % |
| Last 5 years | 11 | 165 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).