roomOpen the map

Corminboeuf: observed built density

Municipality in the canton of Fribourg · FSO no. 2183 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Fribourg, so figures here may be incomplete.

Parcels
830

1 % of the canton

Municipal zones
13
Median utilization
57 %

Canton: 86 %

Switzerland: 10 %

Median GFZ
0.37

Canton: 0.36

Switzerland: 0.09

Median height
8.3 m

Canton: 8.9 m

Switzerland: 9.5 m

Median floors
2.3

Canton: 2.3

Switzerland: 2.3

About Corminboeuf

Corminboeuf is a municipality in the canton of Fribourg. The parcel data lists 830 parcels in 13 municipal zone types. The zone types with the most parcels are Zone résidentielle à faible densité 2 (463), Zone résidentielle à faible densité 1 (112) and Zone résidentielle à moyenne densité 2 (64).

The median parcel is built to a volume utilization of 57 %; half of the parcels lie between 35 % and 98 %. The canton median is 86 %, so Corminboeuf sits below it.

The median building height is 8.3 m at 2.3 floors, and the median floor-area ratio (GFZ) is 0.37. Parcels built in the last 20 years reach a mean volume utilization of 102 % (248 parcels), higher than the 68 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zone résidentielle à faible densité 246349 %
Zone résidentielle à faible densité 111276 %
Zone résidentielle à moyenne densité 264116 %
Zone de centre5251 %
Zone résidentielle à faible densité 34485 %
Zone résidentielle à moyenne densité 13694 %
Zone d'activités2042 %
Zone mixte1188 %
Zone libre80 %
Zone village760 %
Zone d'intérêt général52 %
Zone de protection des cours d'eau50 %
Other zones (1)3-

Volume utilization (ratioV)

Of the 812 parcels with a value, half lie between 35 % and 98 %. The median is 57 % and the mean 66 %.

0 %300 %+

Share of parcels by range

  • below 50 %43 %
  • 50 % to below 100 %33 %
  • 100 % to below 150 %19 %
  • 150 % and above5 %

Floor-area ratio (GFZ)

Of the 812 parcels with a value, half lie between 0.23 and 0.62. The median is 0.37 and the mean 0.45.

0.003.00+

Share of parcels by range

  • below 0.5067 %
  • 0.50 to below 1.0026 %
  • 1.00 to below 1.507 %
  • 1.50 and above1 %

Building height

Of the 681 parcels with a value, half lie between 7.0 m and 9.4 m. The median is 8.3 m and the mean 8.5 m.

0 m60 m+

Share of parcels by range

  • below 8 m45 %
  • 8 m to below 12 m52 %
  • 12 m to below 20 m3 %
  • 20 m and above0 %

Number of floors

Of the 559 parcels with a value, half lie between 1.8 and 2.9. The median is 2.3 and the mean 2.4.

016+

Share of parcels by range

  • below 24 %
  • 2 to below 360 %
  • 3 to below 536 %
  • 5 and above< 1 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years83068 %
Last 60 years65779 %
Last 40 years51486 %
Last 20 years248102 %
Last 15 years200110 %
Last 10 years145122 %
Last 5 years27122 %

Open the map at Corminboeuf

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).