roomOpen the map

Châtel-sur-Montsalvens: observed built density

Municipality in the canton of Fribourg · FSO no. 2128 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Fribourg, so figures here may be incomplete.

Parcels
163

< 1 % of the canton

Municipal zones
3
Median utilization
76 %

Canton: 86 %

Switzerland: 10 %

Median GFZ
0.26

Canton: 0.36

Switzerland: 0.09

Median height
9.5 m

Canton: 8.9 m

Switzerland: 9.5 m

Median floors
2.6

Canton: 2.3

Switzerland: 2.3

About Châtel-sur-Montsalvens

Châtel-sur-Montsalvens is a municipality in the canton of Fribourg. The parcel data lists 163 parcels in 3 municipal zone types. The zone types with the most parcels are Zone résidentielle à faible densité (135), Zone de centre village (27) and Zone d'intérêt général (1).

The median parcel is built to a volume utilization of 76 %; half of the parcels lie between 44 % and 118 %. The canton median is 86 %, so Châtel-sur-Montsalvens sits below it.

The median building height is 9.5 m at 2.6 floors, and the median floor-area ratio (GFZ) is 0.26. Parcels built in the last 20 years reach a mean volume utilization of 113 % (46 parcels), higher than the 89 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zone résidentielle à faible densité13576 %
Zone de centre village2799 %
Zone d'intérêt général1100 %

Volume utilization (ratioV)

Of the 161 parcels with a value, half lie between 44 % and 118 %. The median is 76 % and the mean 85 %.

0 %300 %+

Share of parcels by range

  • below 50 %28 %
  • 50 % to below 100 %38 %
  • 100 % to below 150 %20 %
  • 150 % and above14 %

Floor-area ratio (GFZ)

Of the 161 parcels with a value, half lie between 0.13 and 0.39. The median is 0.26 and the mean 0.30.

0.003.00+

Share of parcels by range

  • below 0.5085 %
  • 0.50 to below 1.0012 %
  • 1.00 to below 1.502 %
  • 1.50 and above0 %

Building height

Of the 119 parcels with a value, half lie between 8.3 m and 10.8 m. The median is 9.5 m and the mean 9.4 m.

0 m60 m+

Share of parcels by range

  • below 8 m18 %
  • 8 m to below 12 m75 %
  • 12 m to below 20 m8 %
  • 20 m and above0 %

Number of floors

Of the 97 parcels with a value, half lie between 2.0 and 3.0. The median is 2.6 and the mean 2.5.

016+

Share of parcels by range

  • below 24 %
  • 2 to below 343 %
  • 3 to below 553 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years16389 %
Last 60 years10499 %
Last 40 years73107 %
Last 20 years46113 %
Last 15 years33125 %
Last 10 years23140 %
Last 5 years9153 %

Open the map at Châtel-sur-Montsalvens

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).