roomOpen the map

Autigny: observed built density

Municipality in the canton of Fribourg · FSO no. 2173 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Fribourg, so figures here may be incomplete.

Parcels
287

< 1 % of the canton

Municipal zones
13
Median utilization
80 %

Canton: 86 %

Switzerland: 10 %

Median GFZ
0.25

Canton: 0.36

Switzerland: 0.09

Median height
8.2 m

Canton: 8.9 m

Switzerland: 9.5 m

Median floors
2.3

Canton: 2.3

Switzerland: 2.3

About Autigny

Autigny is a municipality in the canton of Fribourg. The parcel data lists 287 parcels in 13 municipal zone types. The zone types with the most parcels are Zone de centre village (113), Zone résidentiell à faible densité (105) and Zone de gravière (22).

The median parcel is built to a volume utilization of 80 %; half of the parcels lie between 7 % and 128 %. The canton median is 86 %, close to the level of Autigny.

The median building height is 8.2 m at 2.3 floors, and the median floor-area ratio (GFZ) is 0.25. Parcels built in the last 20 years reach a mean volume utilization of 120 % (51 parcels), higher than the 93 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zone de centre village11349 %
Zone résidentiell à faible densité105100 %
Zone de gravière220 %
Zone village12132 %
Zone libre837 %
Zone d'activité50 %
Zone résidentielle à moyenne densité5104 %
Zone d'intérêt général 140 %
Zone d'intérêt général 243 %
Zone équestre30 %
Zone d'activité de porcherie250 %
Zone d'intérêt général 3250 %
Other zones (1)2-

Volume utilization (ratioV)

Of the 272 parcels with a value, half lie between 7 % and 128 %. The median is 80 % and the mean 87 %.

0 %300 %+

Share of parcels by range

  • below 50 %42 %
  • 50 % to below 100 %21 %
  • 100 % to below 150 %21 %
  • 150 % and above16 %

Floor-area ratio (GFZ)

Of the 272 parcels with a value, half lie between 0.07 and 0.46. The median is 0.25 and the mean 0.38.

0.003.00+

Share of parcels by range

  • below 0.5080 %
  • 0.50 to below 1.0012 %
  • 1.00 to below 1.504 %
  • 1.50 and above4 %

Building height

Of the 177 parcels with a value, half lie between 6.8 m and 10.1 m. The median is 8.2 m and the mean 8.7 m.

0 m60 m+

Share of parcels by range

  • below 8 m47 %
  • 8 m to below 12 m41 %
  • 12 m to below 20 m11 %
  • 20 m and above1 %

Number of floors

Of the 120 parcels with a value, half lie between 1.8 and 2.9. The median is 2.3 and the mean 2.4.

016+

Share of parcels by range

  • below 25 %
  • 2 to below 360 %
  • 3 to below 535 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years28793 %
Last 60 years126110 %
Last 40 years115112 %
Last 20 years51120 %
Last 15 years25147 %
Last 10 years11182 %
Last 5 years5265 %

Open the map at Autigny

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).