roomOpen the map

Wila: observed built density

Municipality in the canton of Zurich · FSO no. 181 · Parcel data as of July 2025

Parcels
1’522

< 1 % of the canton

Municipal zones
20
Median utilization
9 %

Canton: 40 %

Switzerland: 10 %

Median GFZ
0.08

Canton: 0.22

Switzerland: 0.09

Median height
9.6 m

Canton: 10.5 m

Switzerland: 9.5 m

Median floors
2.4

Canton: 2.8

Switzerland: 2.3

About Wila

Wila is a municipality in the canton of Zurich. The parcel data lists 1’522 parcels in 20 municipal zone types. The zone types with the most parcels are Kantonale Landwirtschaftszone (409), Wald (290) and Wohnzone 2A (261).

The median parcel is built to a volume utilization of 9 %; half of the parcels lie between 4 % and 91 %. The canton median is 40 %, so Wila sits below it.

The median building height is 9.6 m at 2.4 floors, and the median floor-area ratio (GFZ) is 0.08. Parcels built in the last 20 years reach a mean volume utilization of 114 % (112 parcels), higher than the 73 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Kantonale Landwirtschaftszone4090 %
Wald2900 %
Wohnzone 2A26168 %
Kernzone16499 %
Wohnzone 2B13381 %
Wohnzone 364101 %
Reservezone330 %
Wohnzone G3a3191 %
Gewerbezone 32856 %
Wohnzone G22899 %
Gewerbezone 42225 %
Gewässer130 %
Other zones (8)46-

Volume utilization (ratioV)

Of the 1’499 parcels with a value, half lie between 4 % and 91 %. The median is 9 % and the mean 56 %.

0 %300 %+

Share of parcels by range

  • below 50 %63 %
  • 50 % to below 100 %14 %
  • 100 % to below 150 %12 %
  • 150 % and above10 %

Floor-area ratio (GFZ)

Of the 1’499 parcels with a value, half lie between 0.04 and 0.41. The median is 0.08 and the mean 0.23.

0.003.00+

Share of parcels by range

  • below 0.5080 %
  • 0.50 to below 1.0016 %
  • 1.00 to below 1.503 %
  • 1.50 and above1 %

Building height

Of the 623 parcels with a value, half lie between 8.3 m and 11.3 m. The median is 9.6 m and the mean 9.6 m.

0 m60 m+

Share of parcels by range

  • below 8 m20 %
  • 8 m to below 12 m65 %
  • 12 m to below 20 m15 %
  • 20 m and above< 1 %

Number of floors

Of the 454 parcels with a value, half lie between 1.9 and 3.0. The median is 2.4 and the mean 2.4.

016+

Share of parcels by range

  • below 28 %
  • 2 to below 346 %
  • 3 to below 546 %
  • 5 and above< 1 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’52273 %
Last 60 years446120 %
Last 40 years321127 %
Last 20 years112114 %
Last 15 years79109 %
Last 10 years66117 %
Last 5 years23132 %

Open the map at Wila

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).