Wallisellen: observed built density
Municipality in the canton of Zurich · FSO no. 69 · Parcel data as of July 2025
- Parcels
- 3’117
1 % of the canton
- Municipal zones
- 27
- Median utilization
- 58 %
Canton: 40 %
Switzerland: 10 %
- Median GFZ
- 0.38
Canton: 0.22
Switzerland: 0.09
- Median height
- 11.0 m
Canton: 10.5 m
Switzerland: 9.5 m
- Median floors
- 2.7
Canton: 2.8
Switzerland: 2.3
About Wallisellen
Wallisellen is a municipality in the canton of Zurich. The parcel data lists 3’117 parcels in 27 municipal zone types. The zone types with the most parcels are Wohnzone 1.9 (733), Wohnzone 1.6 (308) and Wohnzone 1.4 (260).
The median parcel is built to a volume utilization of 58 %; half of the parcels lie between 6 % and 96 %. The canton median is 40 %, so Wallisellen sits above it.
The median building height is 11.0 m at 2.7 floors, and the median floor-area ratio (GFZ) is 0.38. Parcels built in the last 20 years reach a mean volume utilization of 101 % (231 parcels), higher than the 63 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Wohnzone 1.9 | 733 | 81 % |
| Wohnzone 1.6 | 308 | 78 % |
| Wohnzone 1.4 | 260 | 91 % |
| Kantonale Freihaltezone | 251 | 0 % |
| Wald | 247 | 0 % |
| Wohnzone 2.7 | 233 | 85 % |
| Wohnzone 2.4 | 179 | 85 % |
| Freihaltezone | 124 | 0 % |
| Wohnzone 3.0 | 93 | 88 % |
| Industrie- und Gewerbezone 8 | 91 | 30 % |
| Industrie- und Gewerbezone 6 | 84 | 0 % |
| Kantonale Landwirtschaftszone | 78 | 0 % |
| Other zones (15) | 436 | - |
Volume utilization (ratioV)
Of the 3’084 parcels with a value, half lie between 6 % and 96 %. The median is 58 % and the mean 57 %.
Share of parcels by range
- below 50 %47 %
- 50 % to below 100 %31 %
- 100 % to below 150 %18 %
- 150 % and above4 %
Floor-area ratio (GFZ)
Of the 3’084 parcels with a value, half lie between 0.06 and 0.71. The median is 0.38 and the mean 0.47.
Share of parcels by range
- below 0.5059 %
- 0.50 to below 1.0029 %
- 1.00 to below 1.507 %
- 1.50 and above4 %
Building height
Of the 1’753 parcels with a value, half lie between 9.0 m and 13.3 m. The median is 11.0 m and the mean 11.4 m.
Share of parcels by range
- below 8 m13 %
- 8 m to below 12 m49 %
- 12 m to below 20 m35 %
- 20 m and above3 %
Number of floors
Of the 1’526 parcels with a value, half lie between 2.0 and 3.4. The median is 2.7 and the mean 2.8.
Share of parcels by range
- below 28 %
- 2 to below 333 %
- 3 to below 552 %
- 5 and above6 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 3’117 | 63 % |
| Last 60 years | 927 | 102 % |
| Last 40 years | 582 | 104 % |
| Last 20 years | 231 | 101 % |
| Last 15 years | 165 | 104 % |
| Last 10 years | 103 | 110 % |
| Last 5 years | 46 | 110 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).