roomOpen the map

Volketswil: observed built density

Municipality in the canton of Zurich · FSO no. 199 · Parcel data as of July 2025

Parcels
3’784

1 % of the canton

Municipal zones
22
Median utilization
55 %

Canton: 40 %

Switzerland: 10 %

Median GFZ
0.34

Canton: 0.22

Switzerland: 0.09

Median height
10.1 m

Canton: 10.5 m

Switzerland: 9.5 m

Median floors
2.6

Canton: 2.8

Switzerland: 2.3

About Volketswil

Volketswil is a municipality in the canton of Zurich. The parcel data lists 3’784 parcels in 22 municipal zone types. The zone types with the most parcels are Wohnzone zweigeschossig (1’075), Kantonale Landwirtschaftszone (573) and Kernzone I (383).

The median parcel is built to a volume utilization of 55 %; half of the parcels lie between 6 % and 104 %. The canton median is 40 %, so Volketswil sits above it.

The median building height is 10.1 m at 2.6 floors, and the median floor-area ratio (GFZ) is 0.34. Parcels built in the last 20 years reach a mean volume utilization of 108 % (438 parcels), higher than the 66 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Wohnzone zweigeschossig1’07585 %
Kantonale Landwirtschaftszone5730 %
Kernzone I38375 %
Wald3140 %
Wohn- und Gewerbezone zweigeschossig22984 %
Kernzone II20770 %
Wohnzone eingeschossig18985 %
Industriezone mit niedriger Ausnützung12365 %
Wohn- und Gewerbezone dreigeschossig11277 %
Quartiererhaltungszone I108126 %
Wohnzone dreigeschossig79121 %
Industriezone mit hoher Ausnützung680 %
Other zones (10)324-

Volume utilization (ratioV)

Of the 3’752 parcels with a value, half lie between 6 % and 104 %. The median is 55 % and the mean 63 %.

0 %300 %+

Share of parcels by range

  • below 50 %48 %
  • 50 % to below 100 %25 %
  • 100 % to below 150 %17 %
  • 150 % and above10 %

Floor-area ratio (GFZ)

Of the 3’752 parcels with a value, half lie between 0.06 and 0.72. The median is 0.34 and the mean 0.43.

0.003.00+

Share of parcels by range

  • below 0.5060 %
  • 0.50 to below 1.0028 %
  • 1.00 to below 1.509 %
  • 1.50 and above3 %

Building height

Of the 2’182 parcels with a value, half lie between 8.3 m and 11.8 m. The median is 10.1 m and the mean 10.2 m.

0 m60 m+

Share of parcels by range

  • below 8 m21 %
  • 8 m to below 12 m57 %
  • 12 m to below 20 m20 %
  • 20 m and above2 %

Number of floors

Of the 1’746 parcels with a value, half lie between 1.9 and 3.2. The median is 2.6 and the mean 2.6.

016+

Share of parcels by range

  • below 212 %
  • 2 to below 333 %
  • 3 to below 552 %
  • 5 and above3 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years3’78466 %
Last 60 years1’980108 %
Last 40 years1’397111 %
Last 20 years438108 %
Last 15 years279111 %
Last 10 years147114 %
Last 5 years79125 %

Open the map at Volketswil

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).