Trüllikon: observed built density
Municipality in the canton of Zurich · FSO no. 40 · Parcel data as of July 2025
- Parcels
- 1’540
< 1 % of the canton
- Municipal zones
- 13
- Median utilization
- 7 %
Canton: 40 %
Switzerland: 10 %
- Median GFZ
- 0.07
Canton: 0.22
Switzerland: 0.09
- Median height
- 10.2 m
Canton: 10.5 m
Switzerland: 9.5 m
- Median floors
- 2.3
Canton: 2.8
Switzerland: 2.3
About Trüllikon
Trüllikon is a municipality in the canton of Zurich. The parcel data lists 1’540 parcels in 13 municipal zone types. The zone types with the most parcels are Kantonale Landwirtschaftszone (686), Kernzone I (346) and Wald (184).
The median parcel is built to a volume utilization of 7 %; half of the parcels lie between 4 % and 57 %. The canton median is 40 %, so Trüllikon sits below it.
The median building height is 10.2 m at 2.3 floors, and the median floor-area ratio (GFZ) is 0.07. Parcels built in the last 20 years reach a mean volume utilization of 118 % (78 parcels), higher than the 47 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Kantonale Landwirtschaftszone | 686 | 0 % |
| Kernzone I | 346 | 98 % |
| Wald | 184 | 0 % |
| Kantonale Freihaltezone | 99 | 0 % |
| Wohnzone 2 | 63 | 90 % |
| kommunale Freihaltezone | 54 | 0 % |
| Wohnzone 1 | 45 | 66 % |
| Kernzone 2 | 23 | 50 % |
| Kernzone 2E | 20 | 110 % |
| Wohnzone G2 | 10 | 0 % |
| Strassen (HLS) | 5 | 0 % |
| Zone für öffentliche Bauten | 3 | 100 % |
| Other zones (1) | 2 | - |
Volume utilization (ratioV)
Of the 1’523 parcels with a value, half lie between 4 % and 57 %. The median is 7 % and the mean 43 %.
Share of parcels by range
- below 50 %74 %
- 50 % to below 100 %9 %
- 100 % to below 150 %7 %
- 150 % and above10 %
Floor-area ratio (GFZ)
Of the 1’522 parcels with a value, half lie between 0.03 and 0.17. The median is 0.07 and the mean 0.18.
Share of parcels by range
- below 0.5086 %
- 0.50 to below 1.009 %
- 1.00 to below 1.504 %
- 1.50 and above2 %
Building height
Of the 462 parcels with a value, half lie between 7.8 m and 11.7 m. The median is 10.2 m and the mean 9.7 m.
Share of parcels by range
- below 8 m26 %
- 8 m to below 12 m54 %
- 12 m to below 20 m19 %
- 20 m and above0 %
Number of floors
Of the 287 parcels with a value, half lie between 1.8 and 2.9. The median is 2.3 and the mean 2.4.
Share of parcels by range
- below 27 %
- 2 to below 354 %
- 3 to below 539 %
- 5 and above0 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 1’540 | 47 % |
| Last 60 years | 256 | 121 % |
| Last 40 years | 148 | 134 % |
| Last 20 years | 78 | 118 % |
| Last 15 years | 54 | 129 % |
| Last 10 years | 29 | 112 % |
| Last 5 years | 18 | 124 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).