Stallikon: observed built density
Municipality in the canton of Zurich · FSO no. 13 · Parcel data as of July 2025
- Parcels
- 1’763
< 1 % of the canton
- Municipal zones
- 20
- Median utilization
- 10 %
Canton: 40 %
Switzerland: 10 %
- Median GFZ
- 0.09
Canton: 0.22
Switzerland: 0.09
- Median height
- 9.9 m
Canton: 10.5 m
Switzerland: 9.5 m
- Median floors
- 2.5
Canton: 2.8
Switzerland: 2.3
About Stallikon
Stallikon is a municipality in the canton of Zurich. The parcel data lists 1’763 parcels in 20 municipal zone types. The zone types with the most parcels are Kantonale Landwirtschaftszone (595), Wohnzone 2/35 (263) and Wald (238).
The median parcel is built to a volume utilization of 10 %; half of the parcels lie between 5 % and 84 %. The canton median is 40 %, so Stallikon sits below it.
The median building height is 9.9 m at 2.5 floors, and the median floor-area ratio (GFZ) is 0.09. Parcels built in the last 20 years reach a mean volume utilization of 100 % (118 parcels), higher than the 84 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Kantonale Landwirtschaftszone | 595 | 0 % |
| Wohnzone 2/35 | 263 | 87 % |
| Wald | 238 | 0 % |
| Wohnzone 2/30 | 191 | 61 % |
| Wohnzone 1/15 | 114 | 57 % |
| Kernzone W | 72 | 45 % |
| Quartiererhaltungszone A | 53 | 103 % |
| Wohnzone 3/50 | 52 | 84 % |
| Kernzone B | 47 | 44 % |
| Kernzone A | 37 | 49 % |
| Wohnzone G2/35 | 34 | 44 % |
| Quartiererhaltungszone B | 30 | 94 % |
| Other zones (8) | 37 | - |
Volume utilization (ratioV)
Of the 1’739 parcels with a value, half lie between 5 % and 84 %. The median is 10 % and the mean 68 %.
Share of parcels by range
- below 50 %61 %
- 50 % to below 100 %20 %
- 100 % to below 150 %12 %
- 150 % and above8 %
Floor-area ratio (GFZ)
Of the 1’738 parcels with a value, half lie between 0.05 and 0.50. The median is 0.09 and the mean 0.29.
Share of parcels by range
- below 0.5075 %
- 0.50 to below 1.0017 %
- 1.00 to below 1.506 %
- 1.50 and above2 %
Building height
Of the 832 parcels with a value, half lie between 8.2 m and 11.5 m. The median is 9.9 m and the mean 9.8 m.
Share of parcels by range
- below 8 m22 %
- 8 m to below 12 m61 %
- 12 m to below 20 m17 %
- 20 m and above0 %
Number of floors
Of the 638 parcels with a value, half lie between 1.9 and 3.1. The median is 2.5 and the mean 2.5.
Share of parcels by range
- below 28 %
- 2 to below 341 %
- 3 to below 550 %
- 5 and above1 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 1’763 | 84 % |
| Last 60 years | 624 | 114 % |
| Last 40 years | 389 | 115 % |
| Last 20 years | 118 | 100 % |
| Last 15 years | 90 | 102 % |
| Last 10 years | 61 | 99 % |
| Last 5 years | 22 | 94 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).