Schwerzenbach: observed built density
Municipality in the canton of Zurich · FSO no. 197 · Parcel data as of July 2025
- Parcels
- 936
< 1 % of the canton
- Municipal zones
- 20
- Median utilization
- 56 %
Canton: 40 %
Switzerland: 10 %
- Median GFZ
- 0.30
Canton: 0.22
Switzerland: 0.09
- Median height
- 9.2 m
Canton: 10.5 m
Switzerland: 9.5 m
- Median floors
- 2.7
Canton: 2.8
Switzerland: 2.3
About Schwerzenbach
Schwerzenbach is a municipality in the canton of Zurich. The parcel data lists 936 parcels in 20 municipal zone types. The zone types with the most parcels are Kantonale Landwirtschaftszone (166), Wohnzone 1L (164) and Wohnzone 1D (111).
The median parcel is built to a volume utilization of 56 %; half of the parcels lie between 6 % and 93 %. The canton median is 40 %, so Schwerzenbach sits above it.
The median building height is 9.2 m at 2.7 floors, and the median floor-area ratio (GFZ) is 0.30. Parcels built in the last 20 years reach a mean volume utilization of 102 % (89 parcels), higher than the 73 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Kantonale Landwirtschaftszone | 166 | 0 % |
| Wohnzone 1L | 164 | 84 % |
| Wohnzone 1D | 111 | 80 % |
| Wohnzone 2 | 107 | 65 % |
| Wohnzone 3 | 83 | 78 % |
| Kernzone A | 61 | 70 % |
| Wohnzone 4 | 53 | 70 % |
| Quartiererhaltungszone 1 | 37 | 86 % |
| Wald | 34 | 0 % |
| Industriezone 2 | 30 | 476 % |
| Industriezone 1 | 24 | 0 % |
| Wohnzone G4 | 14 | 46 % |
| Other zones (8) | 52 | - |
Volume utilization (ratioV)
Of the 921 parcels with a value, half lie between 6 % and 93 %. The median is 56 % and the mean 69 %.
Share of parcels by range
- below 50 %47 %
- 50 % to below 100 %31 %
- 100 % to below 150 %15 %
- 150 % and above6 %
Floor-area ratio (GFZ)
Of the 921 parcels with a value, half lie between 0.06 and 0.57. The median is 0.30 and the mean 0.36.
Share of parcels by range
- below 0.5070 %
- 0.50 to below 1.0022 %
- 1.00 to below 1.507 %
- 1.50 and above1 %
Building height
Of the 548 parcels with a value, half lie between 7.5 m and 11.6 m. The median is 9.2 m and the mean 9.8 m.
Share of parcels by range
- below 8 m30 %
- 8 m to below 12 m48 %
- 12 m to below 20 m20 %
- 20 m and above2 %
Number of floors
Of the 396 parcels with a value, half lie between 2.0 and 3.4. The median is 2.7 and the mean 2.8.
Share of parcels by range
- below 24 %
- 2 to below 340 %
- 3 to below 551 %
- 5 and above5 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 936 | 73 % |
| Last 60 years | 435 | 123 % |
| Last 40 years | 276 | 137 % |
| Last 20 years | 89 | 102 % |
| Last 15 years | 42 | 102 % |
| Last 10 years | 25 | 98 % |
| Last 5 years | 14 | 98 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).