Mettmenstetten: observed built density
Municipality in the canton of Zurich · FSO no. 9 · Parcel data as of July 2025
- Parcels
- 2’338
1 % of the canton
- Municipal zones
- 20
- Median utilization
- 12 %
Canton: 40 %
Switzerland: 10 %
- Median GFZ
- 0.09
Canton: 0.22
Switzerland: 0.09
- Median height
- 10.7 m
Canton: 10.5 m
Switzerland: 9.5 m
- Median floors
- 2.5
Canton: 2.8
Switzerland: 2.3
About Mettmenstetten
Mettmenstetten is a municipality in the canton of Zurich. The parcel data lists 2’338 parcels in 20 municipal zone types. The zone types with the most parcels are Kantonale Landwirtschaftszone (698), Wohnzone 2A (336) and Kernzone B (314).
The median parcel is built to a volume utilization of 12 %; half of the parcels lie between 5 % and 88 %. The canton median is 40 %, so Mettmenstetten sits below it.
The median building height is 10.7 m at 2.5 floors, and the median floor-area ratio (GFZ) is 0.09. Parcels built in the last 20 years reach a mean volume utilization of 121 % (311 parcels), higher than the 59 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Kantonale Landwirtschaftszone | 698 | 0 % |
| Wohnzone 2A | 336 | 75 % |
| Kernzone B | 314 | 78 % |
| Wohnzone 2B | 254 | 67 % |
| Wald | 239 | 0 % |
| Kernzone A | 104 | 58 % |
| Kernzone D | 102 | 102 % |
| Wohnzone G3 | 53 | 43 % |
| Wohnzone G2 | 46 | 48 % |
| Wohnzone 3 | 40 | 93 % |
| Gewässer | 35 | 0 % |
| Kernzone Weiler | 32 | 86 % |
| Other zones (8) | 85 | - |
Volume utilization (ratioV)
Of the 2’314 parcels with a value, half lie between 5 % and 88 %. The median is 12 % and the mean 56 %.
Share of parcels by range
- below 50 %58 %
- 50 % to below 100 %22 %
- 100 % to below 150 %12 %
- 150 % and above8 %
Floor-area ratio (GFZ)
Of the 2’314 parcels with a value, half lie between 0.05 and 0.62. The median is 0.09 and the mean 0.35.
Share of parcels by range
- below 0.5068 %
- 0.50 to below 1.0021 %
- 1.00 to below 1.508 %
- 1.50 and above3 %
Building height
Of the 1’166 parcels with a value, half lie between 8.9 m and 12.3 m. The median is 10.7 m and the mean 10.7 m.
Share of parcels by range
- below 8 m14 %
- 8 m to below 12 m58 %
- 12 m to below 20 m28 %
- 20 m and above0 %
Number of floors
Of the 1’077 parcels with a value, half lie between 1.6 and 3.1. The median is 2.5 and the mean 2.4.
Share of parcels by range
- below 222 %
- 2 to below 329 %
- 3 to below 547 %
- 5 and above2 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 2’338 | 59 % |
| Last 60 years | 898 | 106 % |
| Last 40 years | 649 | 108 % |
| Last 20 years | 311 | 121 % |
| Last 15 years | 236 | 126 % |
| Last 10 years | 181 | 132 % |
| Last 5 years | 76 | 133 % |
Open the map at Mettmenstetten
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).