roomOpen the map

Vex: observed built density

Municipality in the canton of Valais · FSO no. 6089 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Valais, so figures here may be incomplete.

Parcels
5’820

1 % of the canton

Municipal zones
37
Median utilization
7 %

Canton: 7 %

Switzerland: 10 %

Median GFZ
0.06

Canton: 0.07

Switzerland: 0.09

Median height
8.5 m

Canton: 8.4 m

Switzerland: 9.5 m

Median floors
2.8

Canton: 2.3

Switzerland: 2.3

About Vex

Vex is a municipality in the canton of Valais. The parcel data lists 5’820 parcels in 37 municipal zone types. The zone types with the most parcels are Zone agricole protégée (1’138), Aire forestière (797) and Zone agricole I (578).

The median parcel is built to a volume utilization of 7 %; half of the parcels lie between 3 % and 15 %. The canton median is 7 %, close to the level of Vex.

The median building height is 8.5 m at 2.8 floors, and the median floor-area ratio (GFZ) is 0.06. Parcels built in the last 20 years reach a mean volume utilization of 128 % (546 parcels), higher than the 48 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zone agricole protégée1’1380 %
Aire forestière7970 %
Zone agricole I5780 %
Zone agricole II4920 %
Zone village47772 %
Zone habitation faible densité B - Vex (0.20)3490 %
Zone habitation faible densité D - Les Mayens de Sion (0.10)27360 %
Zone habitation faible densité C - Vex (0.20)20042 %
Zone habitation faible densité E - Les Collons (0.20)19964 %
Zone de transport1810 %
Zone habitation faible densité A - Vex (0.25)1380 %
Zone habitation forte densité C - Les Collons (0.60)13565 %
Other zones (25)863-

Volume utilization (ratioV)

Of the 5’772 parcels with a value, half lie between 3 % and 15 %. The median is 7 % and the mean 35 %.

0 %300 %+

Share of parcels by range

  • below 50 %78 %
  • 50 % to below 100 %9 %
  • 100 % to below 150 %7 %
  • 150 % and above6 %

Floor-area ratio (GFZ)

Of the 5’772 parcels with a value, half lie between 0.03 and 0.10. The median is 0.06 and the mean 0.13.

0.003.00+

Share of parcels by range

  • below 0.5093 %
  • 0.50 to below 1.003 %
  • 1.00 to below 1.502 %
  • 1.50 and above2 %

Building height

Of the 1’412 parcels with a value, half lie between 7.1 m and 9.9 m. The median is 8.5 m and the mean 8.9 m.

0 m60 m+

Share of parcels by range

  • below 8 m41 %
  • 8 m to below 12 m50 %
  • 12 m to below 20 m7 %
  • 20 m and above1 %

Number of floors

Of the 1’036 parcels with a value, half lie between 2.1 and 3.3. The median is 2.8 and the mean 2.8.

016+

Share of parcels by range

  • below 25 %
  • 2 to below 332 %
  • 3 to below 558 %
  • 5 and above5 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years5’82048 %
Last 60 years1’075155 %
Last 40 years822149 %
Last 20 years546128 %
Last 15 years460130 %
Last 10 years66115 %
Last 5 years30110 %

Open the map at Vex

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).