roomOpen the map

Täsch: observed built density

Municipality in the canton of Valais · FSO no. 6295 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Valais, so figures here may be incomplete.

Parcels
2’797

< 1 % of the canton

Municipal zones
21
Median utilization
6 %

Canton: 7 %

Switzerland: 10 %

Median GFZ
0.06

Canton: 0.07

Switzerland: 0.09

Median height
7.6 m

Canton: 8.4 m

Switzerland: 9.5 m

Median floors
2.8

Canton: 2.3

Switzerland: 2.3

About Täsch

Täsch is a municipality in the canton of Valais. The parcel data lists 2’797 parcels in 21 municipal zone types. The zone types with the most parcels are Landwirtschaft 2. (804), Landwirtschaft 1. (525) and Dorferweiterungszone (388).

The median parcel is built to a volume utilization of 6 %; half of the parcels lie between 3 % and 9 %. The canton median is 7 %, so Täsch sits below it.

The median building height is 7.6 m at 2.8 floors, and the median floor-area ratio (GFZ) is 0.06. Parcels built in the last 20 years reach a mean volume utilization of 109 % (56 parcels), higher than the 22 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Landwirtschaft 2.8040 %
Landwirtschaft 1.5250 %
Dorferweiterungszone3880 %
Wald3240 %
Dorfzone1630 %
Ferienhauszone 2.EE1080 %
Wohnzone W970 %
Sport und Erholung720 %
Schutzzone: Erhaltung bestehender Bausubstanz und Siedlugsstruktur5859 %
Verkehr560 %
Parkierungszone430 %
Wohn- + Gewerbe D430 %
Other zones (9)116-

Volume utilization (ratioV)

Of the 2’773 parcels with a value, half lie between 3 % and 9 %. The median is 6 % and the mean 20 %.

0 %300 %+

Share of parcels by range

  • below 50 %86 %
  • 50 % to below 100 %5 %
  • 100 % to below 150 %5 %
  • 150 % and above5 %

Floor-area ratio (GFZ)

Of the 2’773 parcels with a value, half lie between 0.03 and 0.09. The median is 0.06 and the mean 0.14.

0.003.00+

Share of parcels by range

  • below 0.5087 %
  • 0.50 to below 1.007 %
  • 1.00 to below 1.504 %
  • 1.50 and above2 %

Building height

Of the 465 parcels with a value, half lie between 6.4 m and 10.2 m. The median is 7.6 m and the mean 8.4 m.

0 m60 m+

Share of parcels by range

  • below 8 m58 %
  • 8 m to below 12 m29 %
  • 12 m to below 20 m13 %
  • 20 m and above0 %

Number of floors

Of the 204 parcels with a value, half lie between 2.0 and 3.6. The median is 2.8 and the mean 2.8.

016+

Share of parcels by range

  • below 211 %
  • 2 to below 330 %
  • 3 to below 551 %
  • 5 and above7 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years2’79722 %
Last 60 years19896 %
Last 40 years11698 %
Last 20 years56109 %
Last 15 years33118 %
Last 10 years20108 %
Last 5 years8135 %

Open the map at Täsch

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).