Salgesch: observed built density
Municipality in the canton of Valais · FSO no. 6113 · Parcel data as of July 2025
The parcel data covers only part of the land in the canton of Valais, so figures here may be incomplete.
- Parcels
- 4’438
1 % of the canton
- Municipal zones
- 29
- Median utilization
- 6 %
Canton: 7 %
Switzerland: 10 %
- Median GFZ
- 0.06
Canton: 0.07
Switzerland: 0.09
- Median height
- 8.2 m
Canton: 8.4 m
Switzerland: 9.5 m
- Median floors
- 2.3
Canton: 2.3
Switzerland: 2.3
About Salgesch
Salgesch is a municipality in the canton of Valais. The parcel data lists 4’438 parcels in 29 municipal zone types. The zone types with the most parcels are Reben (2’231), Wohnzone W3 (366) and Dorfzone (316).
The median parcel is built to a volume utilization of 6 %; half of the parcels lie between 3 % and 9 %. The canton median is 7 %, so Salgesch sits below it.
The median building height is 8.2 m at 2.3 floors, and the median floor-area ratio (GFZ) is 0.06. Parcels built in the last 20 years reach a mean volume utilization of 271 % (341 parcels), higher than the 75 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| Reben | 2’231 | 0 % |
| Wohnzone W3 | 366 | 51 % |
| Dorfzone | 316 | 129 % |
| Wohnzone W2 | 262 | 82 % |
| Verkehr (Strassen, Plätze) | 238 | 0 % |
| Wald (gemäss Übersichtsplan) | 231 | 0 % |
| IG 2. Erschliessungsetappe | 196 | 0 % |
| Schutz- und Freihaltezone | 122 | 0 % |
| Landwirtschaftszone 2. Priorität | 108 | 0 % |
| Geschützte Landwirtschaftszone (GLZ) | 95 | 0 % |
| Weiden / Sömmerungsweiden | 83 | 0 % |
| Industrie- und Gewerbezone IG | 57 | 0 % |
| Other zones (17) | 133 | - |
Volume utilization (ratioV)
Of the 4’400 parcels with a value, half lie between 3 % and 9 %. The median is 6 % and the mean 41 %.
Share of parcels by range
- below 50 %84 %
- 50 % to below 100 %4 %
- 100 % to below 150 %4 %
- 150 % and above8 %
Floor-area ratio (GFZ)
Of the 4’399 parcels with a value, half lie between 0.03 and 0.09. The median is 0.06 and the mean 0.14.
Share of parcels by range
- below 0.5090 %
- 0.50 to below 1.005 %
- 1.00 to below 1.502 %
- 1.50 and above3 %
Building height
Of the 699 parcels with a value, half lie between 6.6 m and 9.8 m. The median is 8.2 m and the mean 8.3 m.
Share of parcels by range
- below 8 m46 %
- 8 m to below 12 m46 %
- 12 m to below 20 m7 %
- 20 m and above0 %
Number of floors
Of the 440 parcels with a value, half lie between 1.8 and 3.0. The median is 2.3 and the mean 2.4.
Share of parcels by range
- below 213 %
- 2 to below 348 %
- 3 to below 540 %
- 5 and above< 1 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 4’438 | 75 % |
| Last 60 years | 575 | 352 % |
| Last 40 years | 472 | 327 % |
| Last 20 years | 341 | 271 % |
| Last 15 years | 319 | 252 % |
| Last 10 years | 203 | 261 % |
| Last 5 years | 32 | 191 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).