roomOpen the map

Saint-Gingolph: observed built density

Municipality in the canton of Valais · FSO no. 6155 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Valais, so figures here may be incomplete.

Parcels
1’987

< 1 % of the canton

Municipal zones
21
Median utilization
7 %

Canton: 7 %

Switzerland: 10 %

Median GFZ
0.07

Canton: 0.07

Switzerland: 0.09

Median height
8.8 m

Canton: 8.4 m

Switzerland: 9.5 m

Median floors
2.0

Canton: 2.3

Switzerland: 2.3

About Saint-Gingolph

Saint-Gingolph is a municipality in the canton of Valais. The parcel data lists 1’987 parcels in 21 municipal zone types. The zone types with the most parcels are Forêts (871), Zone agricole (265) and Zone faible densité (230).

The median parcel is built to a volume utilization of 7 %; half of the parcels lie between 3 % and 28 %. The canton median is 7 %, close to the level of Saint-Gingolph.

The median building height is 8.8 m at 2.0 floors, and the median floor-area ratio (GFZ) is 0.07. Parcels built in the last 20 years reach a mean volume utilization of 122 % (126 parcels), higher than the 55 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Forêts8710 %
Zone agricole2650 %
Zone faible densité23047 %
Zone de village143225 %
Zone moyenne densité9510 %
Zone de village à aménager830 %
Zone non affectée590 %
Zone de la rive54166 %
Zone d'habitation de faible densité5134 %
Zone d'intérêt général330 %
Zone d'habitation de faible densité non homologuée2838 %
Zone de quai A à aménager1749 %
Other zones (9)58-

Volume utilization (ratioV)

Of the 1’960 parcels with a value, half lie between 3 % and 28 %. The median is 7 % and the mean 46 %.

0 %300 %+

Share of parcels by range

  • below 50 %78 %
  • 50 % to below 100 %7 %
  • 100 % to below 150 %5 %
  • 150 % and above10 %

Floor-area ratio (GFZ)

Of the 1’960 parcels with a value, half lie between 0.03 and 0.10. The median is 0.07 and the mean 0.23.

0.003.00+

Share of parcels by range

  • below 0.5088 %
  • 0.50 to below 1.004 %
  • 1.00 to below 1.502 %
  • 1.50 and above6 %

Building height

Of the 531 parcels with a value, half lie between 6.9 m and 11.0 m. The median is 8.8 m and the mean 9.1 m.

0 m60 m+

Share of parcels by range

  • below 8 m38 %
  • 8 m to below 12 m44 %
  • 12 m to below 20 m17 %
  • 20 m and above1 %

Number of floors

Of the 454 parcels with a value, half lie between 1.4 and 2.6. The median is 2.0 and the mean 2.1.

016+

Share of parcels by range

  • below 229 %
  • 2 to below 344 %
  • 3 to below 525 %
  • 5 and above2 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’98755 %
Last 60 years325128 %
Last 40 years227123 %
Last 20 years126122 %
Last 15 years99126 %
Last 10 years36116 %
Last 5 years27117 %

Open the map at Saint-Gingolph

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).