roomOpen the map

Liddes: observed built density

Municipality in the canton of Valais · FSO no. 6033 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Valais, so figures here may be incomplete.

Parcels
2’747

< 1 % of the canton

Municipal zones
17
Median utilization
7 %

Canton: 7 %

Switzerland: 10 %

Median GFZ
0.07

Canton: 0.07

Switzerland: 0.09

Median height
9.1 m

Canton: 8.4 m

Switzerland: 9.5 m

Median floors
2.3

Canton: 2.3

Switzerland: 2.3

About Liddes

Liddes is a municipality in the canton of Valais. The parcel data lists 2’747 parcels in 17 municipal zone types. The zone types with the most parcels are Zone agricole 2 (855), Zone du centre des villages (663) and Zone agricole 1 (318).

The median parcel is built to a volume utilization of 7 %; half of the parcels lie between 3 % and 28 %. The canton median is 7 %, close to the level of Liddes.

The median building height is 9.1 m at 2.3 floors, and the median floor-area ratio (GFZ) is 0.07. Parcels built in the last 20 years reach a mean volume utilization of 320 % (235 parcels), higher than the 83 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zone agricole 28550 %
Zone du centre des villages66354 %
Zone agricole 13180 %
Zone d'habitation individuelle 0.302680 %
Aire forestière1940 %
Zone non affectée1180 %
Zone mixte habitat, artisanat et commerce 0.50 à aménager1100 %
Zone du hameau 0.609179 %
Zone agricole protégée AP1320 %
Zone extensive du villages 0.60280 %
Zone mixte résidentielle, commerciale et touristique du Chapelet 0.30 à aménager2327 %
Zone extensive du village 0.602186 %
Other zones (5)26-

Volume utilization (ratioV)

Of the 2’724 parcels with a value, half lie between 3 % and 28 %. The median is 7 % and the mean 64 %.

0 %300 %+

Share of parcels by range

  • below 50 %78 %
  • 50 % to below 100 %6 %
  • 100 % to below 150 %6 %
  • 150 % and above10 %

Floor-area ratio (GFZ)

Of the 2’723 parcels with a value, half lie between 0.03 and 0.10. The median is 0.07 and the mean 0.25.

0.003.00+

Share of parcels by range

  • below 0.5084 %
  • 0.50 to below 1.006 %
  • 1.00 to below 1.504 %
  • 1.50 and above6 %

Building height

Of the 692 parcels with a value, half lie between 7.8 m and 10.4 m. The median is 9.1 m and the mean 9.0 m.

0 m60 m+

Share of parcels by range

  • below 8 m27 %
  • 8 m to below 12 m68 %
  • 12 m to below 20 m5 %
  • 20 m and above0 %

Number of floors

Of the 444 parcels with a value, half lie between 1.8 and 2.9. The median is 2.3 and the mean 2.3.

016+

Share of parcels by range

  • below 27 %
  • 2 to below 355 %
  • 3 to below 539 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years2’74783 %
Last 60 years426289 %
Last 40 years329313 %
Last 20 years235320 %
Last 15 years209330 %
Last 10 years34195 %
Last 5 years18266 %

Open the map at Liddes

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).