roomOpen the map

Finhaut: observed built density

Municipality in the canton of Valais · FSO no. 6214 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Valais, so figures here may be incomplete.

Parcels
3’540

1 % of the canton

Municipal zones
21
Median utilization
6 %

Canton: 7 %

Switzerland: 10 %

Median GFZ
0.05

Canton: 0.07

Switzerland: 0.09

Median height
9.1 m

Canton: 8.4 m

Switzerland: 9.5 m

Median floors
2.4

Canton: 2.3

Switzerland: 2.3

About Finhaut

Finhaut is a municipality in the canton of Valais. The parcel data lists 3’540 parcels in 21 municipal zone types. The zone types with the most parcels are Aire forestière (1’784), Zone agricole (pâturage) (574) and Friches, pierriers, incultes (380).

The median parcel is built to a volume utilization of 6 %; half of the parcels lie between 3 % and 8 %. The canton median is 7 %, so Finhaut sits below it.

The median building height is 9.1 m at 2.4 floors, and the median floor-area ratio (GFZ) is 0.05. Parcels built in the last 20 years reach a mean volume utilization of 311 % (139 parcels), higher than the 138 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Aire forestière1’7840 %
Zone agricole (pâturage)5740 %
Friches, pierriers, incultes3800 %
Zone du centre du village18586 %
Zone agricole protégée1730 %
Zone extensive du village7183 %
Zone à faible densité710 %
Zone de chalets à aménager620 %
Zone extensive du village à aménager390 %
Zone à forte densité398 %
Zone à faible densité à aménager330 %
Zone de chalets280 %
Other zones (9)101-

Volume utilization (ratioV)

Of the 3’509 parcels with a value, half lie between 3 % and 8 %. The median is 6 % and the mean 27 %.

0 %300 %+

Share of parcels by range

  • below 50 %92 %
  • 50 % to below 100 %2 %
  • 100 % to below 150 %2 %
  • 150 % and above4 %

Floor-area ratio (GFZ)

Of the 3’509 parcels with a value, half lie between 0.03 and 0.08. The median is 0.05 and the mean 0.07.

0.003.00+

Share of parcels by range

  • below 0.5095 %
  • 0.50 to below 1.002 %
  • 1.00 to below 1.501 %
  • 1.50 and above2 %

Building height

Of the 314 parcels with a value, half lie between 7.3 m and 11.4 m. The median is 9.1 m and the mean 9.6 m.

0 m60 m+

Share of parcels by range

  • below 8 m35 %
  • 8 m to below 12 m46 %
  • 12 m to below 20 m18 %
  • 20 m and above1 %

Number of floors

Of the 185 parcels with a value, half lie between 1.8 and 3.1. The median is 2.4 and the mean 2.5.

016+

Share of parcels by range

  • below 213 %
  • 2 to below 343 %
  • 3 to below 539 %
  • 5 and above4 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years3’540138 %
Last 60 years2351’452 %
Last 40 years1881’689 %
Last 20 years139311 %
Last 15 years130318 %
Last 10 years465 %
Last 5 years465 %

Open the map at Finhaut

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).