roomOpen the map

Fieschertal: observed built density

Municipality in the canton of Valais · FSO no. 6058 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Valais, so figures here may be incomplete.

Parcels
1’809

< 1 % of the canton

Municipal zones
21
Median utilization
6 %

Canton: 7 %

Switzerland: 10 %

Median GFZ
0.06

Canton: 0.07

Switzerland: 0.09

Median height
7.7 m

Canton: 8.4 m

Switzerland: 9.5 m

Median floors
2.1

Canton: 2.3

Switzerland: 2.3

About Fieschertal

Fieschertal is a municipality in the canton of Valais. The parcel data lists 1’809 parcels in 21 municipal zone types. The zone types with the most parcels are Landwirtschaftszone 2 (690), Landwirtschaftszone 1 (288) and Dorfzone (191).

The median parcel is built to a volume utilization of 6 %; half of the parcels lie between 3 % and 9 %. The canton median is 7 %, close to the level of Fieschertal.

The median building height is 7.7 m at 2.1 floors, and the median floor-area ratio (GFZ) is 0.06. Parcels built in the last 20 years reach a mean volume utilization of 126 % (46 parcels), higher than the 32 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Landwirtschaftszone 26900 %
Landwirtschaftszone 12880 %
Dorfzone19152 %
Weidwald1150 %
Wald1120 %
Wohnzone W38280 %
Übriges Gemeindegebiet600 %
Verkehrsanlage580 %
Wohn- und Ferienhauszone WFH560 %
Dorferweiterungszone520 %
Wohn-und Ferienhauszone mit Quartierplan310 %
Wohn- und Geschäftszone WG32439 %
Other zones (9)50-

Volume utilization (ratioV)

Of the 1’788 parcels with a value, half lie between 3 % and 9 %. The median is 6 % and the mean 28 %.

0 %300 %+

Share of parcels by range

  • below 50 %84 %
  • 50 % to below 100 %5 %
  • 100 % to below 150 %5 %
  • 150 % and above6 %

Floor-area ratio (GFZ)

Of the 1’788 parcels with a value, half lie between 0.03 and 0.09. The median is 0.06 and the mean 0.13.

0.003.00+

Share of parcels by range

  • below 0.5089 %
  • 0.50 to below 1.006 %
  • 1.00 to below 1.503 %
  • 1.50 and above1 %

Building height

Of the 308 parcels with a value, half lie between 6.6 m and 9.5 m. The median is 7.7 m and the mean 8.1 m.

0 m60 m+

Share of parcels by range

  • below 8 m56 %
  • 8 m to below 12 m40 %
  • 12 m to below 20 m5 %
  • 20 m and above0 %

Number of floors

Of the 173 parcels with a value, half lie between 1.8 and 2.5. The median is 2.1 and the mean 2.3.

016+

Share of parcels by range

  • below 26 %
  • 2 to below 368 %
  • 3 to below 526 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’80932 %
Last 60 years156124 %
Last 40 years95140 %
Last 20 years46126 %
Last 15 years38127 %
Last 10 years31122 %
Last 5 years1586 %

Open the map at Fieschertal

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).