roomOpen the map

Collonges: observed built density

Municipality in the canton of Valais · FSO no. 6211 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Valais, so figures here may be incomplete.

Parcels
954

< 1 % of the canton

Municipal zones
20
Median utilization
7 %

Canton: 7 %

Switzerland: 10 %

Median GFZ
0.07

Canton: 0.07

Switzerland: 0.09

Median height
8.3 m

Canton: 8.4 m

Switzerland: 9.5 m

Median floors
2.1

Canton: 2.3

Switzerland: 2.3

About Collonges

Collonges is a municipality in the canton of Valais. The parcel data lists 954 parcels in 20 municipal zone types. The zone types with the most parcels are Aire forestière (269), Zone agricole prioritaire (192) and zone faible densité (167).

The median parcel is built to a volume utilization of 7 %; half of the parcels lie between 4 % and 58 %. The canton median is 7 %, close to the level of Collonges.

The median building height is 8.3 m at 2.1 floors, and the median floor-area ratio (GFZ) is 0.07. Parcels built in the last 20 years reach a mean volume utilization of 102 % (49 parcels), higher than the 66 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Aire forestière2690 %
Zone agricole prioritaire1920 %
zone faible densité16780 %
zone village140117 %
zone viticole570 %
Autre zone agricole240 %
zone village à aménager223 %
Affectation différée210 %
zone d'intérèt général151 %
zone forte densité1078 %
zone moyenne densité1024 %
zone artisanale9194 %
Other zones (8)18-

Volume utilization (ratioV)

Of the 933 parcels with a value, half lie between 4 % and 58 %. The median is 7 % and the mean 55 %.

0 %300 %+

Share of parcels by range

  • below 50 %74 %
  • 50 % to below 100 %8 %
  • 100 % to below 150 %9 %
  • 150 % and above9 %

Floor-area ratio (GFZ)

Of the 933 parcels with a value, half lie between 0.03 and 0.20. The median is 0.07 and the mean 0.21.

0.003.00+

Share of parcels by range

  • below 0.5086 %
  • 0.50 to below 1.007 %
  • 1.00 to below 1.503 %
  • 1.50 and above4 %

Building height

Of the 276 parcels with a value, half lie between 6.7 m and 9.6 m. The median is 8.3 m and the mean 8.2 m.

0 m60 m+

Share of parcels by range

  • below 8 m43 %
  • 8 m to below 12 m53 %
  • 12 m to below 20 m4 %
  • 20 m and above0 %

Number of floors

Of the 220 parcels with a value, half lie between 1.7 and 2.6. The median is 2.1 and the mean 2.2.

016+

Share of parcels by range

  • below 215 %
  • 2 to below 358 %
  • 3 to below 526 %
  • 5 and above1 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years95466 %
Last 60 years136119 %
Last 40 years104120 %
Last 20 years49102 %
Last 15 years46102 %
Last 10 years26105 %
Last 5 years10109 %

Open the map at Collonges

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).