roomOpen the map

Arbaz: observed built density

Municipality in the canton of Valais · FSO no. 6261 · Parcel data as of July 2025

The parcel data covers only part of the land in the canton of Valais, so figures here may be incomplete.

Parcels
2’409

< 1 % of the canton

Municipal zones
18
Median utilization
8 %

Canton: 7 %

Switzerland: 10 %

Median GFZ
0.08

Canton: 0.07

Switzerland: 0.09

Median height
8.4 m

Canton: 8.4 m

Switzerland: 9.5 m

Median floors
2.4

Canton: 2.3

Switzerland: 2.3

About Arbaz

Arbaz is a municipality in the canton of Valais. The parcel data lists 2’409 parcels in 18 municipal zone types. The zone types with the most parcels are Zone touristique 0.30 (812), Zone agricole (553) and Zone du centre du village (265).

The median parcel is built to a volume utilization of 8 %; half of the parcels lie between 4 % and 73 %. The canton median is 7 %, so Arbaz sits above it.

The median building height is 8.4 m at 2.4 floors, and the median floor-area ratio (GFZ) is 0.08. Parcels built in the last 20 years reach a mean volume utilization of 120 % (323 parcels), higher than the 53 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zone touristique 0.3081251 %
Zone agricole5530 %
Zone du centre du village26575 %
Zone extensive du village 0.6026343 %
Aire forestière2300 %
Zone d'épaississement du village1870 %
Pâturages400 %
Zone de constructions et d'installations publiques A188 %
Zone agricole protégée120 %
Zone artisanale100 %
Alpages4100 %
Zone d'extraction et de dépôt de matériaux40 %
Other zones (6)11-

Volume utilization (ratioV)

Of the 2’387 parcels with a value, half lie between 4 % and 73 %. The median is 8 % and the mean 47 %.

0 %300 %+

Share of parcels by range

  • below 50 %68 %
  • 50 % to below 100 %14 %
  • 100 % to below 150 %9 %
  • 150 % and above9 %

Floor-area ratio (GFZ)

Of the 2’386 parcels with a value, half lie between 0.04 and 0.19. The median is 0.08 and the mean 0.16.

0.003.00+

Share of parcels by range

  • below 0.5092 %
  • 0.50 to below 1.004 %
  • 1.00 to below 1.502 %
  • 1.50 and above2 %

Building height

Of the 855 parcels with a value, half lie between 7.1 m and 9.7 m. The median is 8.4 m and the mean 8.5 m.

0 m60 m+

Share of parcels by range

  • below 8 m43 %
  • 8 m to below 12 m54 %
  • 12 m to below 20 m3 %
  • 20 m and above0 %

Number of floors

Of the 737 parcels with a value, half lie between 1.9 and 2.9. The median is 2.4 and the mean 2.4.

016+

Share of parcels by range

  • below 27 %
  • 2 to below 350 %
  • 3 to below 542 %
  • 5 and above< 1 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years2’40953 %
Last 60 years725117 %
Last 40 years589116 %
Last 20 years323120 %
Last 15 years251117 %
Last 10 years87135 %
Last 5 years52126 %

Open the map at Arbaz

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).