roomOpen the map

Stansstad: observed built density

Municipality in the canton of Nidwalden · FSO no. 1510 · Parcel data as of July 2025

Parcels
1’122

9 % of the canton

Municipal zones
31
Median utilization
58 %

Canton: 60 %

Switzerland: 10 %

Median GFZ
0.22

Canton: 0.29

Switzerland: 0.09

Median height
-

Canton: -

Switzerland: 9.5 m

Median floors
3.0

Canton: 2.8

Switzerland: 2.3

About Stansstad

Stansstad is a municipality in the canton of Nidwalden. The parcel data lists 1’122 parcels in 31 municipal zone types. The zone types with the most parcels are Landwirtschaftszone (269), Wohnzone 11.5 (224) and Wohnzone 14.5 (127).

The median parcel is built to a volume utilization of 58 %; half of the parcels lie between 7 % and 108 %. The canton median is 60 %, close to the level of Stansstad.

Parcels built in the last 20 years reach a mean volume utilization of 131 % (138 parcels), higher than the 100 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Landwirtschaftszone2690 %
Wohnzone 11.522488 %
Wohnzone 14.512774 %
Wald820 %
Wohnzone 17.58291 %
Wohnzone 12.5 a6185 %
Verkehrszone540 %
Kernzone Dorf Stansstad5089 %
Zone für öffentliche Zwecke29114 %
Übriges Gebiet240 %
Gewerbezone 152180 %
Kernzone 12.51881 %
Other zones (19)81-

Volume utilization (ratioV)

Of the 1’090 parcels with a value, half lie between 7 % and 108 %. The median is 58 % and the mean 91 %.

0 %300 %+

Share of parcels by range

  • below 50 %48 %
  • 50 % to below 100 %23 %
  • 100 % to below 150 %15 %
  • 150 % and above14 %

Floor-area ratio (GFZ)

Of the 1’090 parcels with a value, half lie between 0.06 and 0.64. The median is 0.22 and the mean 0.38.

0.003.00+

Share of parcels by range

  • below 0.5068 %
  • 0.50 to below 1.0023 %
  • 1.00 to below 1.506 %
  • 1.50 and above3 %

Building height

The parcel data has too few values for this measure here.

Number of floors

Of the 483 parcels with a value, half lie between 2.2 and 3.9. The median is 3.0 and the mean 3.1.

016+

Share of parcels by range

  • below 24 %
  • 2 to below 329 %
  • 3 to below 554 %
  • 5 and above13 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’122100 %
Last 60 years535120 %
Last 40 years330125 %
Last 20 years138131 %
Last 15 years93143 %
Last 10 years65165 %
Last 5 years25120 %

Open the map at Stansstad

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).