roomOpen the map

Beckenried: observed built density

Municipality in the canton of Nidwalden · FSO no. 1501 · Parcel data as of July 2025

Parcels
1’358

11 % of the canton

Municipal zones
21
Median utilization
58 %

Canton: 60 %

Switzerland: 10 %

Median GFZ
0.24

Canton: 0.29

Switzerland: 0.09

Median height
-

Canton: -

Switzerland: 9.5 m

Median floors
2.4

Canton: 2.8

Switzerland: 2.3

About Beckenried

Beckenried is a municipality in the canton of Nidwalden. The parcel data lists 1’358 parcels in 21 municipal zone types. The zone types with the most parcels are Wohnzone zweigeschossig (431), Landwirtschaftszone (327) and Wohnzone dreigeschossig (141).

The median parcel is built to a volume utilization of 58 %; half of the parcels lie between 8 % and 110 %. The canton median is 60 %, close to the level of Beckenried.

Parcels built in the last 20 years reach a mean volume utilization of 175 % (169 parcels), lower than the 222 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Wohnzone zweigeschossig43168 %
Landwirtschaftszone32756 %
Wohnzone dreigeschossig14187 %
Kernzone innere11667 %
Übriges Gemeindegebiet580 %
Sondernutzungszone Seeufer550 %
Wald550 %
Kernzone äussere4561 %
Sondernutzungszone Sunnigrain / Klewenkrete3093 %
Zone für öffentliche Zwecke2537 %
Gewerbezone19119 %
Gewässer190 %
Other zones (9)37-

Volume utilization (ratioV)

Of the 1’334 parcels with a value, half lie between 8 % and 110 %. The median is 58 % and the mean 194 %.

0 %300 %+

Share of parcels by range

  • below 50 %45 %
  • 50 % to below 100 %26 %
  • 100 % to below 150 %13 %
  • 150 % and above16 %

Floor-area ratio (GFZ)

Of the 1’334 parcels with a value, half lie between 0.06 and 0.58. The median is 0.24 and the mean 0.37.

0.003.00+

Share of parcels by range

  • below 0.5070 %
  • 0.50 to below 1.0021 %
  • 1.00 to below 1.506 %
  • 1.50 and above3 %

Building height

The parcel data has too few values for this measure here.

Number of floors

Of the 849 parcels with a value, half lie between 1.8 and 3.2. The median is 2.4 and the mean 2.5.

016+

Share of parcels by range

  • below 216 %
  • 2 to below 338 %
  • 3 to below 545 %
  • 5 and above2 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’358222 %
Last 60 years599264 %
Last 40 years405237 %
Last 20 years169175 %
Last 15 years111170 %
Last 10 years57213 %
Last 5 years26103 %

Open the map at Beckenried

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).