roomOpen the map

Sumvitg: observed built density

Municipality in the canton of Graubünden · FSO no. 3985 · Parcel data as of July 2025

Parcels
1’409

1 % of the canton

Municipal zones
22
Median utilization
33 %

Canton: 8 %

Switzerland: 10 %

Median GFZ
0.10

Canton: 0.08

Switzerland: 0.09

Median height
9.2 m

Canton: 9.2 m

Switzerland: 9.5 m

Median floors
2.4

Canton: 2.3

Switzerland: 2.3

About Sumvitg

Sumvitg is a municipality in the canton of Graubünden. The parcel data lists 1’409 parcels in 22 municipal zone types. The zone types with the most parcels are Zona dil vitg (397), Zona d'agricultura (329) and Zona dil vitg engrondida 2 (148).

The median parcel is built to a volume utilization of 33 %; half of the parcels lie between 6 % and 132 %. The canton median is 8 %, so Sumvitg sits above it.

The median building height is 9.2 m at 2.4 floors, and the median floor-area ratio (GFZ) is 0.10. Parcels built in the last 20 years reach a mean volume utilization of 112 % (54 parcels), lower than the 608 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zona dil vitg39789 %
Zona d'agricultura3290 %
Zona dil vitg engrondida 214883 %
Ulteriur territori communal1140 %
Zona forestala1040 %
Zona per baghetgs e stabiliments annex7896 %
Zona da habitar A7098 %
Zona da habitar B4835 %
Zona dil vitg engrondida 331104 %
Zona da mistregn e da habitar2262 %
Zona per stabiliments ed indrez publics1842 %
Zona dil vitg engrondida 2, 2. etappa d'utilisaziun150 %
Other zones (10)35-

Volume utilization (ratioV)

Of the 1’386 parcels with a value, half lie between 6 % and 132 %. The median is 33 % and the mean 569 %.

0 %300 %+

Share of parcels by range

  • below 50 %54 %
  • 50 % to below 100 %13 %
  • 100 % to below 150 %10 %
  • 150 % and above22 %

Floor-area ratio (GFZ)

Of the 1’386 parcels with a value, half lie between 0.05 and 0.63. The median is 0.10 and the mean 0.44.

0.003.00+

Share of parcels by range

  • below 0.5070 %
  • 0.50 to below 1.0015 %
  • 1.00 to below 1.506 %
  • 1.50 and above9 %

Building height

Of the 765 parcels with a value, half lie between 7.6 m and 10.9 m. The median is 9.2 m and the mean 9.2 m.

0 m60 m+

Share of parcels by range

  • below 8 m29 %
  • 8 m to below 12 m59 %
  • 12 m to below 20 m12 %
  • 20 m and above< 1 %

Number of floors

Of the 424 parcels with a value, half lie between 1.7 and 3.1. The median is 2.4 and the mean 2.4.

016+

Share of parcels by range

  • below 218 %
  • 2 to below 334 %
  • 3 to below 547 %
  • 5 and above1 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’409608 %
Last 60 years291608 %
Last 40 years184315 %
Last 20 years54112 %
Last 15 years45117 %
Last 10 years28132 %
Last 5 years17145 %

Open the map at Sumvitg

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).