roomOpen the map

Bergün Filisur: observed built density

Municipality in the canton of Graubünden · FSO no. 3544 · Parcel data as of July 2025

Parcels
1’967

1 % of the canton

Municipal zones
38
Median utilization
9 %

Canton: 8 %

Switzerland: 10 %

Median GFZ
0.08

Canton: 0.08

Switzerland: 0.09

Median height
9.2 m

Canton: 9.2 m

Switzerland: 9.5 m

Median floors
2.1

Canton: 2.3

Switzerland: 2.3

About Bergün Filisur

Bergün Filisur is a municipality in the canton of Graubünden. The parcel data lists 1’967 parcels in 38 municipal zone types. The zone types with the most parcels are Landwirtschaftszone (748), Dorfzone (263) and Forstwirtschaftszone (142).

The median parcel is built to a volume utilization of 9 %; half of the parcels lie between 4 % and 108 %. The canton median is 8 %, close to the level of Bergün Filisur.

The median building height is 9.2 m at 2.1 floors, and the median floor-area ratio (GFZ) is 0.08. Parcels built in the last 20 years reach a mean volume utilization of 11’212 % (100 parcels), lower than the 31’351 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Landwirtschaftszone7480 %
Dorfzone263155 %
Forstwirtschaftszone1420 %
Zone übriges Gemeindegebiet1196 %
Waldzone1060 %
Wohnzone 28938 %
Wohnzone Spuonda da Latsch, Erschliessungsetappe 27848 %
Wohnzone 36785 %
Übriges Gemeindegebiet540 %
Erhaltungszone5299 %
Wohnzone Spuonda da Latsch3190 %
Grünzone290 %
Other zones (26)189-

Volume utilization (ratioV)

Of the 1’922 parcels with a value, half lie between 4 % and 108 %. The median is 9 % and the mean 30’007 %.

0 %300 %+

Share of parcels by range

  • below 50 %65 %
  • 50 % to below 100 %8 %
  • 100 % to below 150 %8 %
  • 150 % and above19 %

Floor-area ratio (GFZ)

Of the 1’921 parcels with a value, half lie between 0.04 and 0.35. The median is 0.08 and the mean 0.29.

0.003.00+

Share of parcels by range

  • below 0.5080 %
  • 0.50 to below 1.009 %
  • 1.00 to below 1.505 %
  • 1.50 and above6 %

Building height

Of the 815 parcels with a value, half lie between 7.0 m and 11.4 m. The median is 9.2 m and the mean 9.3 m.

0 m60 m+

Share of parcels by range

  • below 8 m37 %
  • 8 m to below 12 m45 %
  • 12 m to below 20 m18 %
  • 20 m and above< 1 %

Number of floors

Of the 651 parcels with a value, half lie between 1.7 and 2.7. The median is 2.1 and the mean 2.2.

016+

Share of parcels by range

  • below 216 %
  • 2 to below 353 %
  • 3 to below 531 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’96731’351 %
Last 60 years39025’034 %
Last 40 years22219’806 %
Last 20 years10011’212 %
Last 15 years82160 %
Last 10 years49202 %
Last 5 years26273 %

Open the map at Bergün Filisur

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).