roomOpen the map

Wahlen: observed built density

Municipality in the canton of Basel-Landschaft · FSO no. 2792 · Parcel data as of July 2025

Parcels
1’761

1 % of the canton

Municipal zones
12
Median utilization
7 %

Canton: 41 %

Switzerland: 10 %

Median GFZ
0.07

Canton: 0.22

Switzerland: 0.09

Median height
8.8 m

Canton: 9.6 m

Switzerland: 9.5 m

Median floors
1.9

Canton: 2.1

Switzerland: 2.3

About Wahlen

Wahlen is a municipality in the canton of Basel-Landschaft. The parcel data lists 1’761 parcels in 12 municipal zone types. The zone types with the most parcels are Landwirtschaftszone (969), 2-geschossige Wohnzone W2 (393) and Kernzone (103).

The median parcel is built to a volume utilization of 7 %; half of the parcels lie between 3 % and 48 %. The canton median is 41 %, so Wahlen sits below it.

The median building height is 8.8 m at 1.9 floors, and the median floor-area ratio (GFZ) is 0.07. Parcels built in the last 20 years reach a mean volume utilization of 107 % (110 parcels), higher than the 29 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Landwirtschaftszone9690 %
2-geschossige Wohnzone W239379 %
Kernzone10372 %
Waldareal900 %
2-geschossige Wohn- / Geschäftszone WG26372 %
Spezialzone Abbau und Deponie Müsch610 %
Strasse innerhalb ZPS330 %
Strasse ausserhalb ZPS230 %
Wohn- und Geschäftszonen1381 %
Zone für öffentliche Werke und Anlagen OeWA1029 %
Wahlenbach, offen20 %
Gewässer10 %

Volume utilization (ratioV)

Of the 1’748 parcels with a value, half lie between 3 % and 48 %. The median is 7 % and the mean 27 %.

0 %300 %+

Share of parcels by range

  • below 50 %75 %
  • 50 % to below 100 %14 %
  • 100 % to below 150 %8 %
  • 150 % and above3 %

Floor-area ratio (GFZ)

Of the 1’748 parcels with a value, half lie between 0.03 and 0.22. The median is 0.07 and the mean 0.15.

0.003.00+

Share of parcels by range

  • below 0.5088 %
  • 0.50 to below 1.0010 %
  • 1.00 to below 1.502 %
  • 1.50 and above1 %

Building height

Of the 486 parcels with a value, half lie between 7.4 m and 10.1 m. The median is 8.8 m and the mean 8.8 m.

0 m60 m+

Share of parcels by range

  • below 8 m33 %
  • 8 m to below 12 m60 %
  • 12 m to below 20 m7 %
  • 20 m and above0 %

Number of floors

Of the 454 parcels with a value, half lie between 1.3 and 2.4. The median is 1.9 and the mean 1.9.

016+

Share of parcels by range

  • below 231 %
  • 2 to below 349 %
  • 3 to below 520 %
  • 5 and above0 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years1’76129 %
Last 60 years39298 %
Last 40 years286103 %
Last 20 years110107 %
Last 15 years90108 %
Last 10 years55113 %
Last 5 years19113 %

Open the map at Wahlen

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).