roomOpen the map

Binningen: observed built density

Municipality in the canton of Basel-Landschaft · FSO no. 2765 · Parcel data as of July 2025

Parcels
3’436

3 % of the canton

Municipal zones
53
Median utilization
66 %

Canton: 41 %

Switzerland: 10 %

Median GFZ
0.49

Canton: 0.22

Switzerland: 0.09

Median height
10.5 m

Canton: 9.6 m

Switzerland: 9.5 m

Median floors
2.4

Canton: 2.1

Switzerland: 2.3

About Binningen

Binningen is a municipality in the canton of Basel-Landschaft. The parcel data lists 3’436 parcels in 53 municipal zone types. The zone types with the most parcels are Wohnzone 2b W2b (1’150), Wohnzone 2a W2a (888) and Strasse innerhalb ZPS (305).

The median parcel is built to a volume utilization of 66 %; half of the parcels lie between 19 % and 95 %. The canton median is 41 %, so Binningen sits above it.

The median building height is 10.5 m at 2.4 floors, and the median floor-area ratio (GFZ) is 0.49. Parcels built in the last 20 years reach a mean volume utilization of 102 % (395 parcels), higher than the 66 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Wohnzone 2b W2b1’15068 %
Wohnzone 2a W2a88870 %
Strasse innerhalb ZPS3050 %
Wohn- und Geschäftszone 3 WG321587 %
Wohnzone 3 W311695 %
Wald1100 %
Gemischter Wohnbau, Nutzungsfaktor = 0.4610888 %
Landwirtschaftszone LW800 %
Wohn- und Geschäftszone 4 WG461106 %
Wohn- / Geschäftszone WG358125 %
Zone für öffentliche Werke und Anlagen OeWA5267 %
Wohn- / Geschäftszone WG44289 %
Other zones (41)251-

Volume utilization (ratioV)

Of the 3’373 parcels with a value, half lie between 19 % and 95 %. The median is 66 % and the mean 64 %.

0 %300 %+

Share of parcels by range

  • below 50 %35 %
  • 50 % to below 100 %43 %
  • 100 % to below 150 %18 %
  • 150 % and above4 %

Floor-area ratio (GFZ)

Of the 3’370 parcels with a value, half lie between 0.10 and 0.84. The median is 0.49 and the mean 0.58.

0.003.00+

Share of parcels by range

  • below 0.5051 %
  • 0.50 to below 1.0030 %
  • 1.00 to below 1.5012 %
  • 1.50 and above6 %

Building height

Of the 2’477 parcels with a value, half lie between 8.4 m and 12.6 m. The median is 10.5 m and the mean 10.6 m.

0 m60 m+

Share of parcels by range

  • below 8 m20 %
  • 8 m to below 12 m50 %
  • 12 m to below 20 m29 %
  • 20 m and above1 %

Number of floors

Of the 2’362 parcels with a value, half lie between 1.6 and 3.2. The median is 2.4 and the mean 2.5.

016+

Share of parcels by range

  • below 220 %
  • 2 to below 335 %
  • 3 to below 540 %
  • 5 and above5 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years3’43666 %
Last 60 years1’45587 %
Last 40 years79196 %
Last 20 years395102 %
Last 15 years292103 %
Last 10 years200105 %
Last 5 years96106 %

Open the map at Binningen

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).