roomOpen the map

Oberwil (BL): observed built density

Municipality in the canton of Basel-Landschaft · FSO no. 2771 · Parcel data as of July 2025

Parcels
3’695

3 % of the canton

Municipal zones
36
Median utilization
54 %

Canton: 41 %

Switzerland: 10 %

Median GFZ
0.43

Canton: 0.22

Switzerland: 0.09

Median height
9.5 m

Canton: 9.6 m

Switzerland: 9.5 m

Median floors
2.2

Canton: 2.1

Switzerland: 2.3

About Oberwil (BL)

Oberwil (BL) is a municipality in the canton of Basel-Landschaft. The parcel data lists 3’695 parcels in 36 municipal zone types. The zone types with the most parcels are Zweigeschossige Wohnzone W2b (2’012), Landwirtschaftszone (335) and Strasse innerhalb ZPS (193).

The median parcel is built to a volume utilization of 54 %; half of the parcels lie between 7 % and 84 %. The canton median is 41 %, so Oberwil (BL) sits above it.

The median building height is 9.5 m at 2.2 floors, and the median floor-area ratio (GFZ) is 0.43. Parcels built in the last 20 years reach a mean volume utilization of 93 % (361 parcels), higher than the 53 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Zweigeschossige Wohnzone W2b2’01265 %
Landwirtschaftszone3350 %
Strasse innerhalb ZPS1930 %
Waldareal1930 %
Zweigeschossige Wohnzone W2a18754 %
W216975 %
Dreigeschossige Wohnzone W310087 %
Kernzone9888 %
Strasse ausserhalb ZPS700 %
Zweigeschossige Wohn-Geschäftszone WG2a6174 %
Zweigeschossige Wohn-Geschäftszone WG2b4971 %
Zone für öffentliche Werke und Anlagen OeWA452 %
Other zones (24)183-

Volume utilization (ratioV)

Of the 3’652 parcels with a value, half lie between 7 % and 84 %. The median is 54 % and the mean 52 %.

0 %300 %+

Share of parcels by range

  • below 50 %46 %
  • 50 % to below 100 %37 %
  • 100 % to below 150 %15 %
  • 150 % and above2 %

Floor-area ratio (GFZ)

Of the 3’652 parcels with a value, half lie between 0.07 and 0.69. The median is 0.43 and the mean 0.44.

0.003.00+

Share of parcels by range

  • below 0.5057 %
  • 0.50 to below 1.0034 %
  • 1.00 to below 1.508 %
  • 1.50 and above1 %

Building height

Of the 2’392 parcels with a value, half lie between 8.0 m and 11.1 m. The median is 9.5 m and the mean 9.5 m.

0 m60 m+

Share of parcels by range

  • below 8 m25 %
  • 8 m to below 12 m63 %
  • 12 m to below 20 m12 %
  • 20 m and above< 1 %

Number of floors

Of the 2’291 parcels with a value, half lie between 1.6 and 2.9. The median is 2.2 and the mean 2.2.

016+

Share of parcels by range

  • below 221 %
  • 2 to below 344 %
  • 3 to below 534 %
  • 5 and above1 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years3’69553 %
Last 60 years1’91678 %
Last 40 years96187 %
Last 20 years36193 %
Last 15 years24095 %
Last 10 years13598 %
Last 5 years87102 %

Open the map at Oberwil (BL)

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).