roomOpen the map

Lausen: observed built density

Municipality in the canton of Basel-Landschaft · FSO no. 2828 · Parcel data as of July 2025

Parcels
2’059

2 % of the canton

Municipal zones
33
Median utilization
54 %

Canton: 41 %

Switzerland: 10 %

Median GFZ
0.43

Canton: 0.22

Switzerland: 0.09

Median height
9.6 m

Canton: 9.6 m

Switzerland: 9.5 m

Median floors
2.2

Canton: 2.1

Switzerland: 2.3

About Lausen

Lausen is a municipality in the canton of Basel-Landschaft. The parcel data lists 2’059 parcels in 33 municipal zone types. The zone types with the most parcels are Wohnzone W2 (784), Wohnzone W1 (338) and Landwirtschaftszone (unter Vorbehalt der dynamischen Waldgrenzen) (204).

The median parcel is built to a volume utilization of 54 %; half of the parcels lie between 7 % and 90 %. The canton median is 41 %, so Lausen sits above it.

The median building height is 9.6 m at 2.2 floors, and the median floor-area ratio (GFZ) is 0.43. Parcels built in the last 20 years reach a mean volume utilization of 111 % (248 parcels), lower than the 223 % across all building years.

Parcels by municipal zone

Municipal zone types with their parcel count and median volume utilization
ZoneParcelsMedian utilization
Wohnzone W278462 %
Wohnzone W133881 %
Landwirtschaftszone (unter Vorbehalt der dynamischen Waldgrenzen)2040 %
Strasse innerhalb ZPS1570 %
Wohn-/Geschäftszone WG29560 %
Kernzone87137 %
Wohnzonen7345 %
Gewerbezone G25536 %
Wald370 %
Wohn-/Geschäftszone WG2-E30106 %
Zentrumszone2985 %
Strasse ausserhalb ZPS280 %
Other zones (21)142-

Volume utilization (ratioV)

Of the 2’021 parcels with a value, half lie between 7 % and 90 %. The median is 54 % and the mean 138 %.

0 %300 %+

Share of parcels by range

  • below 50 %46 %
  • 50 % to below 100 %33 %
  • 100 % to below 150 %15 %
  • 150 % and above6 %

Floor-area ratio (GFZ)

Of the 2’020 parcels with a value, half lie between 0.07 and 0.68. The median is 0.43 and the mean 0.46.

0.003.00+

Share of parcels by range

  • below 0.5059 %
  • 0.50 to below 1.0029 %
  • 1.00 to below 1.509 %
  • 1.50 and above3 %

Building height

Of the 1’260 parcels with a value, half lie between 8.3 m and 11.3 m. The median is 9.6 m and the mean 9.7 m.

0 m60 m+

Share of parcels by range

  • below 8 m20 %
  • 8 m to below 12 m65 %
  • 12 m to below 20 m14 %
  • 20 m and above< 1 %

Number of floors

Of the 1’259 parcels with a value, half lie between 1.6 and 2.9. The median is 2.2 and the mean 2.2.

016+

Share of parcels by range

  • below 223 %
  • 2 to below 340 %
  • 3 to below 536 %
  • 5 and above1 %

Building age cohorts

Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.

Built inParcelsMean utilization
All years2’059223 %
Last 60 years1’025142 %
Last 40 years627153 %
Last 20 years248111 %
Last 15 years192117 %
Last 10 years123112 %
Last 5 years41117 %

Open the map at Lausen

How to read this page

room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).