Biel-Benken: observed built density
Municipality in the canton of Basel-Landschaft · FSO no. 2764 · Parcel data as of July 2025
- Parcels
- 2’214
2 % of the canton
- Municipal zones
- 22
- Median utilization
- 42 %
Canton: 41 %
Switzerland: 10 %
- Median GFZ
- 0.19
Canton: 0.22
Switzerland: 0.09
- Median height
- 9.0 m
Canton: 9.6 m
Switzerland: 9.5 m
- Median floors
- 2.1
Canton: 2.1
Switzerland: 2.3
About Biel-Benken
Biel-Benken is a municipality in the canton of Basel-Landschaft. The parcel data lists 2’214 parcels in 22 municipal zone types. The zone types with the most parcels are W2 (787), W1 (273) and Waldareal (267).
The median parcel is built to a volume utilization of 42 %; half of the parcels lie between 5 % and 84 %. The canton median is 41 %, close to the level of Biel-Benken.
The median building height is 9.0 m at 2.1 floors, and the median floor-area ratio (GFZ) is 0.19. Parcels built in the last 20 years reach a mean volume utilization of 104 % (250 parcels), higher than the 51 % across all building years.
Parcels by municipal zone
| Zone | Parcels | Median utilization |
|---|---|---|
| W2 | 787 | 70 % |
| W1 | 273 | 77 % |
| Waldareal | 267 | 0 % |
| Landwirtschaftszone | 242 | 0 % |
| Strasse innerhalb ZPS | 140 | 0 % |
| Kernzone (Dorfkern) | 92 | 106 % |
| Rebbauzone | 92 | 0 % |
| Kernzone (Übergang) | 58 | 68 % |
| Zone nach § 19 Abs. 1 lit. f RBG | 56 | 0 % |
| WG2 | 54 | 72 % |
| Grünzone | 44 | 0 % |
| W2b | 36 | 110 % |
| Other zones (10) | 73 | - |
Volume utilization (ratioV)
Of the 2’189 parcels with a value, half lie between 5 % and 84 %. The median is 42 % and the mean 48 %.
Share of parcels by range
- below 50 %53 %
- 50 % to below 100 %31 %
- 100 % to below 150 %12 %
- 150 % and above4 %
Floor-area ratio (GFZ)
Of the 2’189 parcels with a value, half lie between 0.05 and 0.53. The median is 0.19 and the mean 0.29.
Share of parcels by range
- below 0.5072 %
- 0.50 to below 1.0025 %
- 1.00 to below 1.503 %
- 1.50 and above< 1 %
Building height
Of the 1’138 parcels with a value, half lie between 7.7 m and 10.3 m. The median is 9.0 m and the mean 9.0 m.
Share of parcels by range
- below 8 m28 %
- 8 m to below 12 m67 %
- 12 m to below 20 m5 %
- 20 m and above0 %
Number of floors
Of the 1’116 parcels with a value, half lie between 1.6 and 2.7. The median is 2.1 and the mean 2.1.
Share of parcels by range
- below 220 %
- 2 to below 348 %
- 3 to below 532 %
- 5 and above0 %
Building age cohorts
Mean volume utilization of the parcels built inside each window, from all years on record down to the last five. The windows overlap: the last 20 years include the last 5.
| Built in | Parcels | Mean utilization |
|---|---|---|
| All years | 2’214 | 51 % |
| Last 60 years | 1’038 | 90 % |
| Last 40 years | 611 | 99 % |
| Last 20 years | 250 | 104 % |
| Last 15 years | 158 | 98 % |
| Last 10 years | 80 | 100 % |
| Last 5 years | 29 | 109 % |
How to read this page
room shows observed built density: what has been built on the parcels, not what the zoning permits. Volume utilization (ratioV) compares the built volume of a parcel with the reference volume of its municipal zone type. The floor-area ratio (GFZ) is floor area divided by parcel area; building height and number of floors are taken from the buildings on a parcel. Figures pool all municipal zones of the area. Medians and quartiles are read from bins 10 points (ratioV), 0.1 (GFZ), 2 m (height) and 1 floor wide, so they are exact to within one bin; means are exact. A parcel counts in a distribution only when the parcel data has a value for it. The floors distribution leaves out parcels without a building (0 floors).